# Support

**URL:** https://forum.dangerousthings.com/c/support/5.md?page=1

[Latest](https://forum.dangerousthings.com/latest.md) · [Categories](https://forum.dangerousthings.com/categories.md)

**Page:** 2

---

## [What's recommended for a possible dead implant?](https://forum.dangerousthings.com/t/whats-recommended-for-a-possible-dead-implant/28835)

<div class="topic-metadata">

**Author:** [@vepr](https://forum.dangerousthings.com/u/vepr)\
**Replies:** 8\
**Last updated:** [October 27, 2026, 11:41pm UTC](https://forum.dangerousthings.com/t/whats-recommended-for-a-possible-dead-implant/28835 "2026-10-27T23:41:57Z")

</div>

I installed the xDF3 a little under a year ago and I can no longer get a read. It’s always been easy to talk to using my phone, Proxmark3 rdv4 (2 of them), ACR1252U-DOT, and HID Omnikey 5022. I’ve received no response fr…

---

## [Is the xg3 v1 still encapsulated in resin?](https://forum.dangerousthings.com/t/is-the-xg3-v1-still-encapsulated-in-resin/28849)

<div class="topic-metadata">

**Author:** [@CPDD](https://forum.dangerousthings.com/u/CPDD)\
**Replies:** 3\
**Last updated:** [October 27, 2026, 6:30pm UTC](https://forum.dangerousthings.com/t/is-the-xg3-v1-still-encapsulated-in-resin/28849 "2026-10-27T18:30:49Z")

</div>

I just want to be sure, since the website still states that it uses bioglass, but ive seen posts from a year ago saying its resin. Can anyone confirm pls

---

## [Post Quantum Cryptography for FlexSecure/Apex?](https://forum.dangerousthings.com/t/post-quantum-cryptography-for-flexsecure-apex/28847)

<div class="topic-metadata">

**Author:** [@Frosty](https://forum.dangerousthings.com/u/Frosty)\
**Replies:** 1\
**Last updated:** [October 26, 2026, 2:01pm UTC](https://forum.dangerousthings.com/t/post-quantum-cryptography-for-flexsecure-apex/28847 "2026-10-26T14:01:47Z")

</div>

Hello DangerousThings forum, I am hoping to purchase a flexsecure or apex implant on cyborg Monday to use as a cryptographic anchor. With the imminent mass adoption of post quantum cryptography however, I would hate to…

---

## [Installers in/near Vancouver Canada](https://forum.dangerousthings.com/t/installers-in-near-vancouver-canada/28829)

<div class="topic-metadata">

**Author:** [@ryan126](https://forum.dangerousthings.com/u/ryan126)\
**Replies:** 14\
**Last updated:** [October 24, 2026, 4:16am UTC](https://forum.dangerousthings.com/t/installers-in-near-vancouver-canada/28829 "2026-10-24T04:16:41Z")

</div>

Bought a flexUG4 recently and have been having trouble finding installers. So far I have emailed A tattoo co in Abbotsford as they are a listed partner on the map and didn’t receive a response which I’m assuming is possi…

---

## [Cannot format or write on xsiid anymore](https://forum.dangerousthings.com/t/cannot-format-or-write-on-xsiid-anymore/16974)

<div class="topic-metadata">

**Author:** [@Atlas](https://forum.dangerousthings.com/u/Atlas)\
**Replies:** 9\
**Last updated:** [October 23, 2026, 10:38pm UTC](https://forum.dangerousthings.com/t/cannot-format-or-write-on-xsiid-anymore/16974 "2026-10-23T22:38:04Z")

</div>

Hello, recently my implant stopped working. I am using NFC tools pro and this has been working fine for quite a while now but now I can no longer write anything to my implant anymore. The tag can be recognised by the app…

---

## [How to avoid accidentally locking implants?](https://forum.dangerousthings.com/t/how-to-avoid-accidentally-locking-implants/28329)

<div class="topic-metadata">

**Author:** [@rintroverted](https://forum.dangerousthings.com/u/rintroverted)\
**Replies:** 5\
**Last updated:** [October 23, 2026, 10:05pm UTC](https://forum.dangerousthings.com/t/how-to-avoid-accidentally-locking-implants/28329 "2026-10-23T22:05:33Z")

</div>

I dont know much about RFID/NFC, most of my interactions with it are making very basic NFC cards that lead to web pages using the NFC tools app, or emulating Nintendo Amiibos with my flipper. I know that you can lock a R…

---

## [Proxmark3 Easy Reading Issues](https://forum.dangerousthings.com/t/proxmark3-easy-reading-issues/28749)

<div class="topic-metadata">

**Author:** [@meowsprite](https://forum.dangerousthings.com/u/meowsprite)\
**Replies:** 11\
**Last updated:** [October 23, 2026, 3:52am UTC](https://forum.dangerousthings.com/t/proxmark3-easy-reading-issues/28749 "2026-10-23T03:52:12Z")

</div>

I’ve been having problems with reading high and low frequency tags with the proxmark 3 easy. I have installed the booster board for increased performance as I am attempting to read a next v2 implant in position zero, but…

---

## [Issues cloning PAC/Stanley (LF) to NExT implant using Proxmark3](https://forum.dangerousthings.com/t/issues-cloning-pac-stanley-lf-to-next-implant-using-proxmark3/28819)

<div class="topic-metadata">

**Author:** [@gary](https://forum.dangerousthings.com/u/gary)\
**Replies:** 10\
**Last updated:** [October 23, 2026, 3:44am UTC](https://forum.dangerousthings.com/t/issues-cloning-pac-stanley-lf-to-next-implant-using-proxmark3/28819 "2026-10-23T03:44:13Z")

</div>

Hi, I’m reaching out to get some advice regarding my NExT implant. I am trying to clone a local access key (PAC/Stanley format, 125 kHz) onto the LF side of the NExT using a Proxmark3, but I’m hitting a wall due to sign…

---

## [xEM Version 5 won't program](https://forum.dangerousthings.com/t/xem-version-5-wont-program/28822)

<div class="topic-metadata">

**Author:** [@DDDangerousThings](https://forum.dangerousthings.com/u/DDDangerousThings)\
**Replies:** 2\
**Last updated:** [October 22, 2026, 3:09pm UTC](https://forum.dangerousthings.com/t/xem-version-5-wont-program/28822 "2026-10-22T15:09:16Z")

</div>

Hi! I am new to the community and am new to tinkering with the xEM Access Controller. I ordered the latest version on the site, which is v5. The included documentation differs from v4, such as the programming method (…

---

## [M1448a resin type?](https://forum.dangerousthings.com/t/m1448a-resin-type/28821)

<div class="topic-metadata">

**Author:** [@LordDanielAidanSmith](https://forum.dangerousthings.com/u/LordDanielAidanSmith)\
**Replies:** 2\
**Last updated:** [October 22, 2026, 1:26pm UTC](https://forum.dangerousthings.com/t/m1448a-resin-type/28821 "2026-10-22T13:26:45Z")

</div>

What type of resin is used to encase the m1448a magnets? I picked one up expecting no problem but now my installer is wanting to know before he will do the install.

---

## [Old implant, need information](https://forum.dangerousthings.com/t/old-implant-need-information/28817)

<div class="topic-metadata">

**Author:** [@Blackgoat](https://forum.dangerousthings.com/u/Blackgoat)\
**Replies:** 7\
**Last updated:** [October 22, 2026, 12:43am UTC](https://forum.dangerousthings.com/t/old-implant-need-information/28817 "2026-10-22T00:43:19Z")

</div>

Hello everyone. 10 years ago i decided to get an implant in my hand, did by a bodmoder. Now i have to pass an MRI, and my appointment was refused due to the implant. I only have these information. I dont know who sold …

---

## [How to find someone to remove an implant](https://forum.dangerousthings.com/t/how-to-find-someone-to-remove-an-implant/28811)

<div class="topic-metadata">

**Author:** [@elliotstoner](https://forum.dangerousthings.com/u/elliotstoner)\
**Replies:** 10\
**Last updated:** [October 21, 2026, 3:51pm UTC](https://forum.dangerousthings.com/t/how-to-find-someone-to-remove-an-implant/28811 "2026-10-21T15:51:14Z")

</div>

Hello all. Apologies, I know similar things have been asked previously, and I’ve already read a post about the different ways to have an implant removed. However, I still don’t understand how I can find a provider that w…

---

## [xDF3 DESFire No Longer Reading](https://forum.dangerousthings.com/t/xdf3-desfire-no-longer-reading/28815)

<div class="topic-metadata">

**Author:** [@vepr](https://forum.dangerousthings.com/u/vepr)\
**Replies:** 5\
**Last updated:** [October 21, 2026, 12:42am UTC](https://forum.dangerousthings.com/t/xdf3-desfire-no-longer-reading/28815 "2026-10-21T00:42:31Z")

</div>

I have a xDF3 in the top of my hand and all of a sudden nothing can read it. I was successfully reading it a couple weeks ago. I’ve had it for about a year. I’ve tried to scan it with android phones, my 2 Proxmark RDV4 r…

---

## [(HOW TO) Set Up Vivokey Authenticator for Vivokey APEX](https://forum.dangerousthings.com/t/how-to-set-up-vivokey-authenticator-for-vivokey-apex/16694)

<div class="topic-metadata">

**Author:** [@Pilgrimsmaster](https://forum.dangerousthings.com/u/Pilgrimsmaster)\
**Replies:** 2\
**Last updated:** [October 19, 2026, 8:55pm UTC](https://forum.dangerousthings.com/t/how-to-set-up-vivokey-authenticator-for-vivokey-apex/16694 "2026-10-19T20:55:15Z")

</div>

I thought I would throw together a quick HOW TO for the VivoKey APEX in hopes of helping out any new :logo\_vk\_word: APEX adopters Included in this guide:- What Apps to download ( android, but iOS will be the equivale…

---

## [Persistent Identifiers / Privacy of NExT / xMagic / FlexSecure](https://forum.dangerousthings.com/t/persistent-identifiers-privacy-of-next-xmagic-flexsecure/28801)

<div class="topic-metadata">

**Author:** [@glacial\_treason](https://forum.dangerousthings.com/u/glacial_treason)\
**Replies:** 5\
**Last updated:** [October 18, 2026, 6:30pm UTC](https://forum.dangerousthings.com/t/persistent-identifiers-privacy-of-next-xmagic-flexsecure/28801 "2026-10-18T18:30:42Z")

</div>

Hi there, I am planning to get my first implants, currently considering xMagic, NeXT, and FlexSecure. As a privacy conscious person I would like to learn more about what if any persistent identifiers exist that could p…

---

## [Flex Narrow xMagic?](https://forum.dangerousthings.com/t/flex-narrow-xmagic/28797)

<div class="topic-metadata">

**Author:** [@glacial\_treason](https://forum.dangerousthings.com/u/glacial_treason)\
**Replies:** 14\
**Last updated:** [October 17, 2026, 7:33pm UTC](https://forum.dangerousthings.com/t/flex-narrow-xmagic/28797 "2026-10-17T19:33:29Z")

</div>

Hi there, excited to be a part of this community I’m looking to get my first implant(s) and have a few questions. Firstly I am eyeing the xMagic implant. I read that the flex narrow form factor implants are dramaticall…

---

## [“Will it fit” vs Apex Manager: RAM on apex 2](https://forum.dangerousthings.com/t/will-it-fit-vs-apex-manager-ram-on-apex-2/28785)

<div class="topic-metadata">

**Author:** [@Techknowcase](https://forum.dangerousthings.com/u/Techknowcase)\
**Replies:** 9\
**Last updated:** [October 17, 2026, 1:46am UTC](https://forum.dangerousthings.com/t/will-it-fit-vs-apex-manager-ram-on-apex-2/28785 "2026-10-17T01:46:28Z")

</div>

Hi, I’m playing around with my apex 2/mega and I’m trying to figure out what I can install on them. I was making my decisions based on the website “Will it fit?” Section. According to it: I should be able to fit TO…

---

## [Vivokey NFC Passkey Bridge and Graphene](https://forum.dangerousthings.com/t/vivokey-nfc-passkey-bridge-and-graphene/28792)

<div class="topic-metadata">

**Author:** [@Greyroo](https://forum.dangerousthings.com/u/Greyroo)\
**Replies:** 5\
**Last updated:** [October 16, 2026, 8:07pm UTC](https://forum.dangerousthings.com/t/vivokey-nfc-passkey-bridge-and-graphene/28792 "2026-10-16T20:07:32Z")

</div>

Good evening all. Recently, I’ve been trying to switch all my security centered stuff onto my Graphene Os Device, on a Pixel 9a phone. I, after some difficulty, managed to download the NFC passkey bridge onto the device…

---

## [Storing passwords alongside 2FA on the Apex Flex; is it possible?](https://forum.dangerousthings.com/t/storing-passwords-alongside-2fa-on-the-apex-flex-is-it-possible/28291)

<div class="topic-metadata">

**Author:** [@Oishii](https://forum.dangerousthings.com/u/Oishii)\
**Replies:** 20\
**Last updated:** [October 16, 2026, 1:11am UTC](https://forum.dangerousthings.com/t/storing-passwords-alongside-2fa-on-the-apex-flex-is-it-possible/28291 "2026-10-16T01:11:05Z")

</div>

Greetings! I’m trying to store all my passwords and 2FA codes on an implant to keep sensitive info off my phone entirely. The 2FA side is mostly sorted as I’m looking at the VivoKey Apex Flex Narrow for that. My question…

---

## [\[Rant\] How can a company like UPS still exist behaving like this?](https://forum.dangerousthings.com/t/rant-how-can-a-company-like-ups-still-exist-behaving-like-this/28773)

<div class="topic-metadata">

**Author:** [@Techknowcase](https://forum.dangerousthings.com/u/Techknowcase)\
**Replies:** 8\
**Last updated:** [October 14, 2026, 5:37am UTC](https://forum.dangerousthings.com/t/rant-how-can-a-company-like-ups-still-exist-behaving-like-this/28773 "2026-10-14T05:37:33Z")

</div>

Hello all, I want to preface this by saying this is a rant. It has nothing to do with Dangerous things except for the fact that DT chose UPS for shipping to Canada. I’m guessing they chose UPS because of their great shi…

---

## [Apex spectrum - future plans](https://forum.dangerousthings.com/t/apex-spectrum-future-plans/28780)

<div class="topic-metadata">

**Author:** [@darthyhy](https://forum.dangerousthings.com/u/darthyhy)\
**Replies:** 3\
**Last updated:** [October 14, 2026, 12:44am UTC](https://forum.dangerousthings.com/t/apex-spectrum-future-plans/28780 "2026-10-14T00:44:14Z")

</div>

I recently purchased and implanted an Apex Flex Spectrum and a NExT v2. I’m really enjoying experimenting with the technology, but I’m disappointed that I can’t use my Apex for contactless payments. I understand that Fi…

---

## [xMagic and dual readers](https://forum.dangerousthings.com/t/xmagic-and-dual-readers/28733)

<div class="topic-metadata">

**Author:** [@Gli7chcrash](https://forum.dangerousthings.com/u/Gli7chcrash)\
**Replies:** 20\
**Last updated:** [October 14, 2026, 12:40am UTC](https://forum.dangerousthings.com/t/xmagic-and-dual-readers/28733 "2026-10-14T00:40:17Z")

</div>

Hello all, So a couple weeks ago today I self installed my first implant, the xMagic in L0. I found that was going to be the best option as we use LF for our readers at work and could still use the HF for other mifare c…

---

## [I'm new just bought and installed the next V2](https://forum.dangerousthings.com/t/im-new-just-bought-and-installed-the-next-v2/27256)

<div class="topic-metadata">

**Author:** [@Shadowyone](https://forum.dangerousthings.com/u/Shadowyone)\
**Replies:** 18\
**Last updated:** [October 13, 2026, 1:57am UTC](https://forum.dangerousthings.com/t/im-new-just-bought-and-installed-the-next-v2/27256 "2026-10-13T01:57:28Z")

</div>

So I have a couple of questions I installed Sunday November 2nd 2025. I own a flipper zero, proxmark 3 easy, proxmark Rd 4.0, proxmark 3 x, icopy x. I couldn’t read the chip with any of the proxmark stuff sadly dunno …

---

## [Newbie on a mission](https://forum.dangerousthings.com/t/newbie-on-a-mission/28770)

<div class="topic-metadata">

**Author:** [@Gform](https://forum.dangerousthings.com/u/Gform)\
**Replies:** 3\
**Last updated:** [October 12, 2026, 7:06am UTC](https://forum.dangerousthings.com/t/newbie-on-a-mission/28770 "2026-10-12T07:06:07Z")

</div>

Hello. I am looking for an implantible contactless payment solution that will work in Canada. I have done research but am still not confident i know what is available. I know payment systems are not universal, with co…

---

## [Error: Static encrypted nonce detected. Aborted](https://forum.dangerousthings.com/t/error-static-encrypted-nonce-detected-aborted/28016)

<div class="topic-metadata">

**Author:** [@Techiziod](https://forum.dangerousthings.com/u/Techiziod)\
**Replies:** 10\
**Last updated:** [October 9, 2026, 6:49am UTC](https://forum.dangerousthings.com/t/error-static-encrypted-nonce-detected-aborted/28016 "2026-10-09T06:49:43Z")

</div>

I am trying to get all the keys from a MF 1k, but I keep running into “Error: Static encrypted nonce detected. Aborted“ MCU....... AT91SAM7S512 Rev A Memory.... 512 KB ( 68% used ) Client.... Iceman/master/…

---

## [Read Issues on new flexUG4](https://forum.dangerousthings.com/t/read-issues-on-new-flexug4/28641)

<div class="topic-metadata">

**Author:** [@Appellus](https://forum.dangerousthings.com/u/Appellus)\
**Replies:** 28\
**Last updated:** [October 6, 2026, 9:18pm UTC](https://forum.dangerousthings.com/t/read-issues-on-new-flexug4/28641 "2026-10-06T21:18:40Z")

</div>

Howdy y’all, back again. I recently got a bunch of work done recently (shout out to Shawn O’Hare), including putting in a flexUG4 and dUG4T I grabbed this past August. The flex in in the back of my hand is where my flexM…

---

## [Apex Flex Shipping to Mexico](https://forum.dangerousthings.com/t/apex-flex-shipping-to-mexico/28627)

<div class="topic-metadata">

**Author:** [@FrancoTaiwan33](https://forum.dangerousthings.com/u/FrancoTaiwan33)\
**Replies:** 4\
**Last updated:** [October 6, 2026, 7:28pm UTC](https://forum.dangerousthings.com/t/apex-flex-shipping-to-mexico/28627 "2026-10-06T19:28:22Z")

</div>

Hi Dangerous Things team, I’m interested in purchasing an Apex Flex Module, but when I try to complete the checkout, I receive a message stating that the product is not available for delivery to my location in Mexico Ci…

---

## [Proxmox3.app - device has been flashing for the past 2 hours](https://forum.dangerousthings.com/t/proxmox3-app-device-has-been-flashing-for-the-past-2-hours/28747)

<div class="topic-metadata">

**Author:** [@Dalite01](https://forum.dangerousthings.com/u/Dalite01)\
**Replies:** 1\
**Last updated:** [October 2, 2026, 11:37pm UTC](https://forum.dangerousthings.com/t/proxmox3-app-device-has-been-flashing-for-the-past-2-hours/28747 "2026-10-02T23:37:48Z")

</div>

all actions originated from the proxmox.app website. I don’t want to shutdown or reboot the Windows 10 machine/

---

## [Just Inserted xNT NFC Tag - What now? Best Practice](https://forum.dangerousthings.com/t/just-inserted-xnt-nfc-tag-what-now-best-practice/5575)

<div class="topic-metadata">

**Author:** [@Fillefi](https://forum.dangerousthings.com/u/Fillefi)\
**Replies:** 19\
**Last updated:** [October 2, 2026, 4:30pm UTC](https://forum.dangerousthings.com/t/just-inserted-xnt-nfc-tag-what-now-best-practice/5575 "2026-10-02T16:30:39Z")

</div>

Hi Guys, Im not sure if this is posted somewhere before(i was not able to find it) But what is the best practice after beeing installed with a new chip? 1: should i run the DT APP and set a passcode? 2: Should i run N…

---

## [Professional install guides for piercers](https://forum.dangerousthings.com/t/professional-install-guides-for-piercers/28739)

<div class="topic-metadata">

**Author:** [@Plastic](https://forum.dangerousthings.com/u/Plastic)\
**Replies:** 1\
**Last updated:** [October 1, 2026, 2:21am UTC](https://forum.dangerousthings.com/t/professional-install-guides-for-piercers/28739 "2026-10-01T02:21:12Z")

</div>

Hey all, new here. Was wondering if anyone has a professional install guide for the Vivo Apex Narrow? I’ve found the standard install guide for the glass cylinder chips but nothing quite as detailed for the 4 gauge needl…

[Previous page](https://forum.dangerousthings.com/c/support/5.md)

[Next page](https://forum.dangerousthings.com/c/support/5.md?page=2)
