# “Best Practices” Way to Change T5577 Mode

**URL:** <https://forum.dangerousthings.com/t/best-practices-way-to-change-t5577-mode/10449>\
**Category:** Support\
**Created:** [April 3, 2021, 4:18pm UTC](https://forum.dangerousthings.com/t/best-practices-way-to-change-t5577-mode/10449 "2021-04-03T16:18:38Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![dc74089](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/dc74089/32/11492_2.png) [@dc74089](https://forum.dangerousthings.com/u/dc74089)\
**Post date:** [April 3, 2021, 4:18pm UTC](https://forum.dangerousthings.com/t/best-practices-way-to-change-t5577-mode/10449/1 "2021-04-03T16:18:38Z")

</div>

Hi all!

I’m a proud new owner of a [NExT](https://dangerousthings.com/product/next/), and I’ve had a lot of fun with the HF side of things so far. I am hoping to enroll myself in the access control system at work (and have the security dept’s full blessing), but I find myself needing to change the mode of the LF side of my implant from the factory EM41xx mode to HID Prox mode. Having a specific ID is not as important since I have the opportunity to enroll a fresh tag — no cloning necessary (though I do have an existing badge, so cloning is an option).

I’ve read through threads praising and later advising against the “[blue cloner](https://dangerousthings.com/product/blue-cloner/)” (and I see that the “trusted” model is no longer available on the DT store). I have also read thru instructions for the Proxmark, but I see that the “easy” model available from DT is not compatible with the ProxLF antenna and have read that positioning is tricky without it. And the RDV4 is… Expensive.

So, my question: What is the community’s current preferred or “best practices” way to write to an X-series LF tag? I’d like to minimize the risk of page tearing as much as is sensible… I would hate to brick the LF side of the tag, since that was most of my motivation to get the tag. Or, am I bring too paranoid, and will I be able to take care of this with the Proxmark 3 if I’m careful and have a steady hand?

---

<div class="post-metadata">

**Author:** ![anon7067117](https://forum.dangerousthings.com/letter_avatar_proxy/v4/letter/a/258eb7/32.png) [@anon7067117](https://forum.dangerousthings.com/u/anon7067117)\
**Post date:** [April 3, 2021, 4:45pm UTC](https://forum.dangerousthings.com/t/best-practices-way-to-change-t5577-mode/10449/2 "2021-04-03T16:45:46Z")

</div>

I don’t know very much about the [T5577](https://dngr.us/T5577) so somebody else will have to help you out with that.  
A Easy with a [DIY antenna](https://forum.dangerousthings.com/t/diy-lf-antenna-for-proxmark-3-easy/6654) you can make for quite cheap (if you are handy with that stuff) would probably be a good substitute for the ProxLF antenna.  
@amal by the way there seems to be untapped market for the easy LF antenna there. Better add it to the list of awesome things to (maybe) make happen (someday) 😉

---

<div class="post-metadata">

**Author:** ![MTFT](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/mtft/32/1999_2.png) [@MTFT](https://forum.dangerousthings.com/u/MTFT)\
**Post date:** [April 3, 2021, 6:41pm UTC](https://forum.dangerousthings.com/t/best-practices-way-to-change-t5577-mode/10449/3 "2021-04-03T18:41:46Z")

</div>

I did a clone on my next with the proxmark easy without the special antenna. My technique was to balance the reader on top of my hand, reader down, and make sure that I could get consistent reads without it moving or anything. Then I just went for it.

---

<div class="post-metadata">

**Author:** ![Pilgrimsmaster](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/pilgrimsmaster/32/1179_2.png) [@Pilgrimsmaster](https://forum.dangerousthings.com/u/Pilgrimsmaster)\
**Post date:** [April 3, 2021, 8:12pm UTC](https://forum.dangerousthings.com/t/best-practices-way-to-change-t5577-mode/10449/4 "2021-04-03T20:12:32Z")

</div>

![image](https://dangerousthings-forum.b-cdn.net/original/2X/6/60b818d73f8591332863ed0bfb04743a54aa3b42.jpeg)

You have clearly done your research.  
:vault_boy_thumbs_up:

> [@dc74089](#):
>
> I have the opportunity to enroll a fresh tag — no cloning necessary (though I do have an existing badge, so cloning is an option).

A fresh tag / new ID you would need a Proxmark, but to simply clone an existing card, a “[Blue Cloner](https://dangerousthings.com/product/blue-cloner/)” will be all you need.

> [@dc74089](#):
>
> the “[blue cloner](https://dangerousthings.com/product/blue-cloner/)” (and I see that the “trusted” model is no longer available on the DT store).

That is a bummer, hopefully Amal sees this post and has an answer for you if they are getting restocked…  
The DT model is the only one I have seen that does AWID mode, but other than that if you buy one from anywhere else, It SHOULD do EM and HID.  
If you do this, I would recommend Roscos mod for reading/writing, it will increase the performance.

> [@The "hot wire" blue cloner mod](https://forum.dangerousthings.com/t/the-hot-wire-blue-cloner-mod/7267):
>
> In the interest of minimizing the risk of tearing when programming a [T5577](https://dngr.us/T5577) with my [blue cloner](https://dangerousthings.com/product/blue-cloner/), and to avoid opening the enclosure each and every time I want to use it to expose the coil, I modified it to put half of the coil on the outside and edgewise, to make it easy to “slash across” the implant orthogonally and as close as possible. Check it out: [https://www.dailymotion.com/video/x7upgrv](https://www.dailymotion.com/video/x7upgrv) My [blue cloner](https://dangerousthings.com/product/blue-cloner/) sort of looks like a hot wire cutter now, hence the title of this thread. I took a few…

I’m sure during your thorough research, you found out that the [blue cloner](https://dangerousthings.com/product/blue-cloner/) writes a password to your chip, it is only a minor inconvenience compared with the ease of use, especially if you only want to toggle between modes that the [blue cloner](https://dangerousthings.com/product/blue-cloner/) is capable of, but if you want to change to another mode or remove the password, you will need a [PM3](https://dangerousthings.com/product/proxmark3-easy/).

The [PM3](https://dangerousthings.com/product/proxmark3-easy/) easy, is a “better” tool than the [blue cloner](https://dangerousthings.com/product/blue-cloner/), and although the [PM3](https://dangerousthings.com/product/proxmark3-easy/) Easy would definitely benefit from a custom LF antenna like @anon7067117 said, it can still read and write with the factory antenna if you take your time to get the positioning correct like @MTFT said

---

<div class="post-metadata">

**Author:** ![yeka](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/yeka/32/5459_2.png) [@yeka](https://forum.dangerousthings.com/u/yeka)\
**Post date:** [April 4, 2021, 2:12pm UTC](https://forum.dangerousthings.com/t/best-practices-way-to-change-t5577-mode/10449/5 "2021-04-04T14:12:57Z")

</div>

It’s a good thing the [blue cloner](https://dangerousthings.com/product/blue-cloner/) is out of stock.

---

<div class="post-metadata">

**Author:** ![dc74089](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/dc74089/32/11492_2.png) [@dc74089](https://forum.dangerousthings.com/u/dc74089)\
**Post date:** [April 4, 2021, 6:28pm UTC](https://forum.dangerousthings.com/t/best-practices-way-to-change-t5577-mode/10449/6 "2021-04-04T18:28:50Z")

</div>

Thanks all! I’ve got a [PM3](https://dangerousthings.com/product/proxmark3-easy/) Easy on the way 🙂

---

<div class="post-metadata">

**Author:** ![Aemun](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/aemun/32/1491_2.png) [@Aemun](https://forum.dangerousthings.com/u/Aemun)\
**Post date:** [April 4, 2021, 9:34pm UTC](https://forum.dangerousthings.com/t/best-practices-way-to-change-t5577-mode/10449/7 "2021-04-04T21:34:04Z")

</div>

I’ll just add a note about the [PM3](https://dangerousthings.com/product/proxmark3-easy/) Easy. Be careful with the Micro-B connector, they are not the strongest

---

<div class="post-metadata">

**Author:** ![BioBeehive](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/biobeehive/32/15652_2.png) [@BioBeehive](https://forum.dangerousthings.com/u/BioBeehive)\
**Post date:** [April 4, 2021, 10:14pm UTC](https://forum.dangerousthings.com/t/best-practices-way-to-change-t5577-mode/10449/8 "2021-04-04T22:14:49Z")

</div>

I used the [pm3](https://dangerousthings.com/product/proxmark3-easy/) easy to change my [xem](https://dngr.us/xem) to my work badge (not em400, don’t remember what it was rn). Just held the edge of the circular LF antenna perpendicular to my chip while writing, may take 2 tries but it works.

---

<div class="post-metadata">

**Author:** ![DoubleQ](https://forum.dangerousthings.com/letter_avatar_proxy/v4/letter/d/96bed5/32.png) [@DoubleQ](https://forum.dangerousthings.com/u/DoubleQ)\
**Post date:** [April 5, 2021, 12:50am UTC](https://forum.dangerousthings.com/t/best-practices-way-to-change-t5577-mode/10449/9 "2021-04-05T00:50:42Z")

</div>

In a super similar boat!. First time posting here, and glad I saw this. Just had a [Spark 2](https://forum.dangerousthings.com/%20https://dangerousthings.com/product/vivokey-spark/) and [NExT](https://dangerousthings.com/product/next/) implanted last Wednesday and was looking for a way to do this, the RDV4 is definitely kind of expensive for what it is. Might try the Promark 3 Easy w/ the DIY antenna, thanks for suggesting that @anon7067117

---

<div class="post-metadata">

**Author:** ![Zwack](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/zwack/32/12101_2.png) [@Zwack](https://forum.dangerousthings.com/u/Zwack)\
**Post date:** [April 5, 2021, 2:18am UTC](https://forum.dangerousthings.com/t/best-practices-way-to-change-t5577-mode/10449/10 "2021-04-05T02:18:27Z")

</div>

While I haven’t tried a [Proxmark3](https://dngr.us/pm3) RDV4, or a diy antenna on my [Proxmark3](https://dngr.us/pm3) Easy, (and I don’t have any implants) I would strongly suggest trying reading at least with a regular [proxmark3](https://dngr.us/pm3) easy before replacing the antenna. That way you will be familiar with the software and know that the hardware works.

---

<div class="post-metadata">

**Author:** ![ItaBeAight](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/itabeaight/32/8558_2.png) [@ItaBeAight](https://forum.dangerousthings.com/u/ItaBeAight)\
**Post date:** [April 14, 2021, 5:32am UTC](https://forum.dangerousthings.com/t/best-practices-way-to-change-t5577-mode/10449/11 "2021-04-14T05:32:21Z")

</div>

Anyone know if or when the DT [blue cloner](https://dangerousthings.com/product/blue-cloner/) will be back in stock?

I have one but want a second one for modding.

---

<div class="post-metadata">

**Author:** ![Pilgrimsmaster](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/pilgrimsmaster/32/1179_2.png) [@Pilgrimsmaster](https://forum.dangerousthings.com/u/Pilgrimsmaster)\
**Post date:** [April 14, 2021, 5:39am UTC](https://forum.dangerousthings.com/t/best-practices-way-to-change-t5577-mode/10449/12 "2021-04-14T05:39:29Z")

</div>

> [@ItaBeAight](#):
>
> if or when the DT [blue cloner](https://dangerousthings.com/product/blue-cloner/) will be back in stock?

:blue_cloner:  
Definately an Amal question

> [@ItaBeAight](#):
>
> want a second one for modding.

Ohhh, What are you considering doing?

---

<div class="post-metadata">

**Author:** ![amal](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/amal/32/37192_2.png) [@amal](https://forum.dangerousthings.com/u/amal)\
**Post date:** [April 14, 2021, 6:56pm UTC](https://forum.dangerousthings.com/t/best-practices-way-to-change-t5577-mode/10449/13 "2021-04-14T18:56:26Z")

</div>

> [@ItaBeAight](#):
>
> when the DT [blue cloner](https://dangerousthings.com/product/blue-cloner/) will be back in stock?

![tenor (6)](https://dangerousthings-forum.b-cdn.net/original/2X/5/544d3ea2f7de029b0afe7d040cd30200e673fb01.gif)

It’s just not worth it when a solid [proxmark3](https://dngr.us/proxmark3) option exists that doesn’t break the bank.

---

<div class="post-metadata">

**Author:** ![amal](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/amal/32/37192_2.png) [@amal](https://forum.dangerousthings.com/u/amal)\
**Post date:** [April 14, 2021, 7:43pm UTC](https://forum.dangerousthings.com/t/best-practices-way-to-change-t5577-mode/10449/14 "2021-04-14T19:43:01Z")

</div>

Actually Michelle found a few more in a corner… we’ll put them on the site momentarily…

---

<div class="post-metadata">

**Author:** ![Pilgrimsmaster](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/pilgrimsmaster/32/1179_2.png) [@Pilgrimsmaster](https://forum.dangerousthings.com/u/Pilgrimsmaster)\
**Post date:** [April 14, 2021, 7:57pm UTC](https://forum.dangerousthings.com/t/best-practices-way-to-change-t5577-mode/10449/15 "2021-04-14T19:57:02Z")

</div>

@ItaBeAight  
Thought I better drop your @ so hopefully you see this before they truly sell out

---

<div class="post-metadata">

**Author:** ![Devilclarke](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/devilclarke/32/19069_2.png) [@Devilclarke](https://forum.dangerousthings.com/u/Devilclarke)\
**Post date:** [April 14, 2021, 8:10pm UTC](https://forum.dangerousthings.com/t/best-practices-way-to-change-t5577-mode/10449/16 "2021-04-14T20:10:40Z")

</div>

Can I ask you to ponder something. With the [PM3](https://dangerousthings.com/product/proxmark3-easy/)’s you sell would it be worth taking the 60seconds to remove the middle boards as it serves no purpose and obscures the HF antenna traces.

Just something to mull.

---

<div class="post-metadata">

**Author:** ![amal](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/amal/32/37192_2.png) [@amal](https://forum.dangerousthings.com/u/amal)\
**Post date:** [April 14, 2021, 8:25pm UTC](https://forum.dangerousthings.com/t/best-practices-way-to-change-t5577-mode/10449/17 "2021-04-14T20:25:45Z")

</div>

> [@Devilclarke](#):
>
> Can

I thought about it… but… it ends up being a lot of work that could very easily be done by the customer… it actually takes more than 60 seconds per unit and the parts left to use for this purpose aren’t exactly perfect fit… so it’s wishy washy if I want to take a low margin thing and spend even more time on it… but I have thought about it.

---

<div class="post-metadata">

**Author:** ![ItaBeAight](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/itabeaight/32/8558_2.png) [@ItaBeAight](https://forum.dangerousthings.com/u/ItaBeAight)\
**Post date:** [April 14, 2021, 8:39pm UTC](https://forum.dangerousthings.com/t/best-practices-way-to-change-t5577-mode/10449/18 "2021-04-14T20:39:03Z")

</div>

Noice! Thanks man!, I was able to get a couple more ordered just now.

---

<div class="post-metadata">

**Author:** ![dc74089](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/dc74089/32/11492_2.png) [@dc74089](https://forum.dangerousthings.com/u/dc74089)\
**Post date:** [April 14, 2021, 9:06pm UTC](https://forum.dangerousthings.com/t/best-practices-way-to-change-t5577-mode/10449/19 "2021-04-14T21:06:37Z")

</div>

I got my badge cloned first try with the [PM3](https://dangerousthings.com/product/proxmark3-easy/) Easy! No custom antenna needed. Fwiw I get great read on the LF side with the easy’s built in antenna, but the HF reads/writes are a lot more picky.

---

<div class="post-metadata">

**Author:** ![magic](https://forum.dangerousthings.com/letter_avatar_proxy/v4/letter/m/ce73a5/32.png) [@magic](https://forum.dangerousthings.com/u/magic)\
**Post date:** [April 14, 2021, 9:09pm UTC](https://forum.dangerousthings.com/t/best-practices-way-to-change-t5577-mode/10449/20 "2021-04-14T21:09:58Z")

</div>

Maybe I understand it wrong. You change the id of the LF side of the NeXt?

[Next page](https://forum.dangerousthings.com/t/best-practices-way-to-change-t5577-mode/10449.md?page=2)
