# Can't detect the 125KHz chip in my NExT implant

**URL:** <https://forum.dangerousthings.com/t/cant-detect-the-125khz-chip-in-my-next-implant/9320>\
**Category:** Support\
**Created:** [December 22, 2020, 5:40pm UTC](https://forum.dangerousthings.com/t/cant-detect-the-125khz-chip-in-my-next-implant/9320 "2020-12-22T17:40:21Z")\
**Posts on this page:** 1\
**Showing post:** 8

<div class="post-metadata">

**Author:** ![Eriequiet](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/eriequiet/32/6437_2.png) [@Eriequiet](https://forum.dangerousthings.com/u/Eriequiet)\
**Post date:** [December 22, 2020, 9:22pm UTC](https://forum.dangerousthings.com/t/cant-detect-the-125khz-chip-in-my-next-implant/9320/8 "2020-12-22T21:22:17Z")

</div>

In a nut shell, popping the antenna out of the housing and changing its orientation to work a little better with implants

> [@The "hot wire" blue cloner mod](https://forum.dangerousthings.com/t/the-hot-wire-blue-cloner-mod/7267):
>
> In the interest of minimizing the risk of tearing when programming a [T5577](https://dngr.us/T5577) with my [blue cloner](https://dangerousthings.com/product/blue-cloner/), and to avoid opening the enclosure each and every time I want to use it to expose the coil, I modified it to put half of the coil on the outside and edgewise, to make it easy to “slash across” the implant orthogonally and as close as possible. Check it out: [https://www.dailymotion.com/video/x7upgrv](https://www.dailymotion.com/video/x7upgrv) My [blue cloner](https://dangerousthings.com/product/blue-cloner/) sort of looks like a hot wire cutter now, hence the title of this thread. I took a few…

---

_[View the full topic](https://forum.dangerousthings.com/t/cant-detect-the-125khz-chip-in-my-next-implant/9320)._
