This article might help with RC522 vs PN532.
2 Likes
I have made a start to the matrix.
Breakout boards has it’s own sheet
here is the link
needs images and implant compatibility added to it
Awesome 
I’ll (slowly) add the info for the ones I have.
I’m sure people will trickle in information too.
Thanks for keeping the list going and updated.
1 Like
works with flexEM at ~1.5cm range ish, so youll likely need to hollow a partial cavity in whatever drawer/cabinet that you mount it on, if it’s thicker than that.
does not work with xEM however 
4 Likes
update: can confirm that this will also work with your xEM (in addition to flexEM), granted you first remove and relocate the antenna to outside whatever cabinet/drawer you are installing the lock in. a better designed antenna might achieve better coupling with xEM as well, which I may look into doing…
2 Likes
I can confirm the Yale Keyless Connected Smart Lock (night latch type) works with 1k magic gen1a.
The model number is YD-01-CON-NOMOD-CH
- Edit : I will be testing this with a FlexM1 as soon as I can, sorry for posting prematurely. I’ll update as soon as I can.
1 Like
It would be a very fair assumption, that if it works with an xM1, it will VERY likely work with a FlexM1
Are you planning a gen1a or 2 Flex?
Any other implants you can test with?
Not at all, Much appreciated, I will update the sheet
I haven’t tested with a xM1, I tested with a magic gen1a card. But I’m sure it’ll work with a FlexM1.
After confirming it worked with the card I’m just going to get the gen1a.
Tried with my NExT, doesn’t seem to read at all.
Ah, Ok cool, I will hold off on the YES until you update, cheers
Im pretty confident also
No problem.
- Also I did use the X Field Detector on it and it was blinking, not sure if that’s a good enough indicator that an xM1 would also be able to be read.
Its definitely a promising sign 
1 Like
I wouldn’t be able to confirm that as mine will be a flex install, but hopefully someone else can after if we get a “YES” from the FlexM1
Perfect, Thanks, I will update the matrix
…
…
And DONE!
Had my FlexM1 Gen1a installed today and can confirm it works with the Yale lock even on day one with large amounts of swelling.
1 Like
Awesome, thanks for the update.
Added to the matrix
1 Like
Nice one, think this might be quite an important one as its a best seller on Amazon, at least in the UK. Pretty affordable too.
I bought the MEtechs MID300 and it does NOT seem to work with my NExT. I was able to get the lock to work with the key fob style T5577s but unable to with either my implant or the T5577 cards that come with the Proxmark 3. The lock would not even react to my implant. Does anyone have a similar style lock they’d recommend for an interior door? I haven’t been able to find many options for a non deadbolt
