# FlexM1 install with needle questions

**URL:** <https://forum.dangerousthings.com/t/flexm1-install-with-needle-questions/10782>\
**Category:** Support\
**Created:** [April 26, 2021, 2:14pm UTC](https://forum.dangerousthings.com/t/flexm1-install-with-needle-questions/10782 "2021-04-26T14:14:06Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![reisub](https://forum.dangerousthings.com/letter_avatar_proxy/v4/letter/r/58956e/32.png) [@reisub](https://forum.dangerousthings.com/u/reisub)\
**Post date:** [April 26, 2021, 2:14pm UTC](https://forum.dangerousthings.com/t/flexm1-install-with-needle-questions/10782/1 "2021-04-26T14:14:06Z")

</div>

My piercer has neither done a flex install nor using the 5mm needle, so he’s leaning on playing safe first;

1. Due to the size of the [FlexM1](https://dngr.us/flexm1), he’s a bit wary of me installing it at my R5 / Knife edge , and instead recommends me R4. I would go for R4 if I’m not planning to get a [FlexMT](https://dangerousthings.com/product/flexmt/) in the future. Are there anything that we should be aware of if I still went for R5?

2. Do the installation side of the [FlexM1](https://dngr.us/flexm1) matters? ie the front/top (black) and back (silver)

3. Any other stuff/tricks that I should inform him? Ill pass him the [flex install procedure as well](https://forum.dangerousthings.com/t/8mm-wedge-flex-device-installation-with-custom-4g-needle/6693)

 ![IMG_2862](https://dangerousthings-forum.b-cdn.net/original/2X/c/c8b49b8fb553ac4c2ca023733751063b23cab37f.jpeg)

---

<div class="post-metadata">

**Author:** ![Pilgrimsmaster](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/pilgrimsmaster/32/1179_2.png) [@Pilgrimsmaster](https://forum.dangerousthings.com/u/Pilgrimsmaster)\
**Post date:** [April 26, 2021, 6:15pm UTC](https://forum.dangerousthings.com/t/flexm1-install-with-needle-questions/10782/2 "2021-04-26T18:15:48Z")

</div>

> [@reisub](#):
>
> I would go for R4 if I’m not planning to get a [FlexMT](https://dangerousthings.com/product/flexmt/) in the future. Are there anything that we should be aware of if I still went for R5?

I think that is a good decision, alternatively if it works for you, would be using the #4 on the other hand.

> [@reisub](#):
>
> Do the installation side of the [FlexM1](https://dangerousthings.com/product/flexm1/) matters? ie the front/top (black) and back (silver)

Black side up is Amal tracking and controlling you, Silver side up is your government…  
😉  
Nah, fair question, but it doesn’t mater, it’s just the chip 👍

Not to be confused with “just the tip”

![tKRSKJl](https://dangerousthings-forum.b-cdn.net/original/2X/9/9d722bd9468e0004ef673999b774b2d80f76f182.gif)

> [@reisub](#):
>
> Any other stuff/tricks that I should inform him?

Just the bevel down vs bevel up  
OR  
the newer **modified technique**

> [@The anti🚫-derailment🚃 & thread🧵 hijacking🔫 thread🧵 interrobang](https://forum.dangerousthings.com/t/the-anti-derailment-thread-hijacking-thread/5860/4204):
>
> I did a modified procedure… bevel up for the first part of the incision, up to the hilt (back of the bevel). Removed and re-inserted bevel down to pocket. Worked great. No point dive issues on initial incision.

> [@Purewrist prepaid payment card in USA](https://forum.dangerousthings.com/t/purewrist-prepaid-payment-card-in-usa/8267/415):
>
> a good rule works be 150% the length of the device should be the depth from the back of the bevel (not the point) to the incision site.

 ![image](https://dangerousthings-forum.b-cdn.net/original/2X/6/6dd2b4ed91df141d1dfc6441194e4b371211d733.jpeg)

---

<div class="post-metadata">

**Author:** ![Atilla](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/atilla/32/24676_2.png) [@Atilla](https://forum.dangerousthings.com/u/Atilla)\
**Post date:** [April 26, 2021, 9:51pm UTC](https://forum.dangerousthings.com/t/flexm1-install-with-needle-questions/10782/3 "2021-04-26T21:51:45Z")

</div>

Lube! One of the situations it’s highly recommend!

---

<div class="post-metadata">

**Author:** ![reisub](https://forum.dangerousthings.com/letter_avatar_proxy/v4/letter/r/58956e/32.png) [@reisub](https://forum.dangerousthings.com/u/reisub)\
**Post date:** [April 27, 2021, 7:51am UTC](https://forum.dangerousthings.com/t/flexm1-install-with-needle-questions/10782/4 "2021-04-27T07:51:32Z")

</div>

Thats what he said 😏

Jokes aside, he did use lube last time for my [NExT](https://dangerousthings.com/product/next/) and [xM1](https://dangerousthings.com/product/xM1/) impant.

---

<div class="post-metadata">

**Author:** ![reisub](https://forum.dangerousthings.com/letter_avatar_proxy/v4/letter/r/58956e/32.png) [@reisub](https://forum.dangerousthings.com/u/reisub)\
**Post date:** [April 27, 2021, 8:48am UTC](https://forum.dangerousthings.com/t/flexm1-install-with-needle-questions/10782/5 "2021-04-27T08:48:54Z")

</div>

> [@Pilgrimsmaster](#):
>
> I think that is a good decision, alternatively if it works for you, would be using the #4 on the other hand.

Most of the reader that I plan to use with the M1 favors the right hand. I tried using those reader with my left hands for a few days, wasnt pleasant.

And thanks for the new technique, I’ll let my piercer know !

---

<div class="post-metadata">

**Author:** ![reisub](https://forum.dangerousthings.com/letter_avatar_proxy/v4/letter/r/58956e/32.png) [@reisub](https://forum.dangerousthings.com/u/reisub)\
**Post date:** [May 19, 2021, 6:50am UTC](https://forum.dangerousthings.com/t/flexm1-install-with-needle-questions/10782/6 "2021-05-19T06:50:15Z")

</div>

15 days in with prenatal supplements, and almost completely healed. Unfortunately, the public transportation MIFARE reader I plan to use it on still cant get a read on it. It does works (albeit awkwardly) with my office elevator, so that’s a consolation I suppose.

 ![signal-2021-05-19-144406](https://dangerousthings-forum.b-cdn.net/original/2X/4/4dae6a457d6813eeae918d79438912bfceb5627b.jpeg)

---

<div class="post-metadata">

**Author:** ![iAm](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/iam/32/18371_2.png) [@iAm](https://forum.dangerousthings.com/u/iAm)\
**Post date:** [February 12, 2022, 12:09pm UTC](https://forum.dangerousthings.com/t/flexm1-install-with-needle-questions/10782/7 "2022-02-12T12:09:55Z")

</div>

Hi guys, abiut the [flexm1](https://dngr.us/flexm1), since its not in the transponder injection and its in a vial, and the range is higher than the xseries, has anyone tried or had any luck of registering it on the lock or the NFC phone while still in the vial?

What was your experience?

Thanks

---

<div class="post-metadata">

**Author:** ![enginerd](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/enginerd/32/38119_2.png) [@enginerd](https://forum.dangerousthings.com/u/enginerd)\
**Post date:** [February 12, 2022, 1:46pm UTC](https://forum.dangerousthings.com/t/flexm1-install-with-needle-questions/10782/8 "2022-02-12T13:46:01Z")

</div>

I would’ve started a new thread but ok…

While I don’t have any flex implants and haven’t tried to read one in the vial, it should work fine unless I’m missing something.

And I’d keep the vial sealed and let the installer open it. Just to keep the implant safe and clean…

---

<div class="post-metadata">

**Author:** ![iAm](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/iam/32/18371_2.png) [@iAm](https://forum.dangerousthings.com/u/iAm)\
**Post date:** [February 12, 2022, 2:17pm UTC](https://forum.dangerousthings.com/t/flexm1-install-with-needle-questions/10782/9 "2022-02-12T14:17:22Z")

</div>

Great idea dude. Will do that 😊
