# FlexM1 install with needle questions

**URL:** <https://forum.dangerousthings.com/t/flexm1-install-with-needle-questions/10782>\
**Category:** Support\
**Created:** [April 26, 2021, 2:14pm UTC](https://forum.dangerousthings.com/t/flexm1-install-with-needle-questions/10782 "2021-04-26T14:14:06Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Pilgrimsmaster](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/pilgrimsmaster/32/1179_2.png) [@Pilgrimsmaster](https://forum.dangerousthings.com/u/Pilgrimsmaster)\
**Post date:** [April 26, 2021, 6:15pm UTC](https://forum.dangerousthings.com/t/flexm1-install-with-needle-questions/10782/2 "2021-04-26T18:15:48Z")

</div>

> [@reisub](#):
>
> I would go for R4 if I’m not planning to get a [FlexMT](https://dangerousthings.com/product/flexmt/) in the future. Are there anything that we should be aware of if I still went for R5?

I think that is a good decision, alternatively if it works for you, would be using the #4 on the other hand.

> [@reisub](#):
>
> Do the installation side of the [FlexM1](https://dangerousthings.com/product/flexm1/) matters? ie the front/top (black) and back (silver)

Black side up is Amal tracking and controlling you, Silver side up is your government…  
😉  
Nah, fair question, but it doesn’t mater, it’s just the chip 👍

Not to be confused with “just the tip”

![tKRSKJl](https://dangerousthings-forum.b-cdn.net/original/2X/9/9d722bd9468e0004ef673999b774b2d80f76f182.gif)

> [@reisub](#):
>
> Any other stuff/tricks that I should inform him?

Just the bevel down vs bevel up  
OR  
the newer **modified technique**

> [@The anti🚫-derailment🚃 & thread🧵 hijacking🔫 thread🧵 interrobang](https://forum.dangerousthings.com/t/the-anti-derailment-thread-hijacking-thread/5860/4204):
>
> I did a modified procedure… bevel up for the first part of the incision, up to the hilt (back of the bevel). Removed and re-inserted bevel down to pocket. Worked great. No point dive issues on initial incision.

> [@Purewrist prepaid payment card in USA](https://forum.dangerousthings.com/t/purewrist-prepaid-payment-card-in-usa/8267/415):
>
> a good rule works be 150% the length of the device should be the depth from the back of the bevel (not the point) to the incision site.

 ![image](https://dangerousthings-forum.b-cdn.net/original/2X/6/6dd2b4ed91df141d1dfc6441194e4b371211d733.jpeg)

---

_[View the full topic](https://forum.dangerousthings.com/t/flexm1-install-with-needle-questions/10782)._
