Kaba access system

[Zwack]

I assume “Computer Talky Hole” is a technical term.

Here is the official page for “Standalone Mode” you will need to decide what mode you want to set it up with in advance.

You can also use a Proxmark3 with the android app but there are limitations (lf search can be rather finicky)

[Marc.r22]

I was able to read the keycard with my coworkers phone. This was the result.

I thinks it’s the same tag type the NExT has

[Pilgrimsmaster]

NFC Tools isn’t the best at chip identification, If you could ask your Co-worker to Download TagInfo and try again to be sure

then to share

How to share NFC chip data via TagInfo app

TagInfo is an app made by a chip manufacturing company called NXP. It does a decent job of determining the type of chip it’s talking to and fully scanning any accessible memory into a scan report. It also makes sharing information gathered easy, which makes diagnosing problems or answering questions about specific NFC tags one might have much more efficient. Android iPhone [Sharing microchip implant data with TagInfo] Do note that iOS has some serious limitations still when it …

[Stoellchen]

Hi all

I’ve just got my NExT and xSIID installed . Now I’m looking for some useful stuff for the future and found this thread and an answer in another forum for the questions here. Found this: “My ring (NTAG216) works perfectly with the Dorma Kaba evolo cylinder when using a Mifare master card. I assume it won’t work when you use a Legic master card however I have not tested this.”

[roema]

Hi!

We have the same system and i have a mulit tag, ISO 14443-a and LEGIC.

So i tried to sniff with Proxmark3 RDV4 (hf sniff / 14a sniff) without success.

No packets are being recorded. Sometimes I see individual packets, but never a complete sequence. The Proxmark’s antenna is good. Has anyone been able to sniff these readers with tags?

Regards, Man