Hey all, quick Update Time.
Just a reminder that DT Club gets first notice of my product releases
I added 4.5 new products to my site.
First up are DIY Field Generators. Now you can make your own formfactor and bracelets if wanted. These are just like the field generators I carry but are just the base. You add your own antenna and power.
I of course have antenna and USB-C pigtails I can also supply.
These have actually become my favorite. Using usb-c I can supply 5v vs the 3v that the cr2032 supplies in my other generators. These can be pushed up to 19v before burning out components but I would recommend not going over 9v for extended use. I also recommend putting some type of switch in place. But these are fun to play with and use to learn to make your own antennas and coils with magnet wire
NFC Extenders in 3 seperate Flavors:
Standard - JST PH2.0 connectors
Pro - IPEX1 (U.FL) style connectors
ProSMA - SMA style connector (Note these are not going to be regularly stocked and once they are gone they are gone).
Each extender has 2 different cable length options. 15cm is the default. But you can still use your own if your crafty
These dont work great with Implants unless you add an MFGC to the middle of the extender that you plan to scan with an implant. I will release a more implant ready version with a smaller coil that works great in testing but it wont be until after the Chinese New Year holiday (mid Feburary).
This was a goal project of mine for about a year. Last year I wanted two things to exist that didn’t. First was a repeater so I could scan my implant with my phone. We have that with the RSP and MFGC. Next I wanted a NFC Extender so I could relocate my reader to another area of my desk. And while they do exist I wanted ones with custom cable lengths. They were always too long or too short. I tested many different cable connection styles. I finally settled on JST and Ipex. I initially wanted SMA however it introduces to much capacitence so I will only be selling what I have and I don’t really intend to make more of this style. It just doesn’t maintain the performance I demand over extended lengths.
I’ve tested all of these devices and they work great with card and fob credentials over 4 ft. If you need a extender solution and didn’t want to wait for my implant compatible version you can place an RSP or MFGC in the center of extender that you plan to use to scan the implant and it will narrow the field enough to get successful reads. However that’s if you need it now and don’t want to wait.
and finally to go along with the DIY Field Generators i will now stock the 27mm antenna’s for any diy projects. These will resonate at 13.56mhz with 100pf of capcetence. So any diy projects you had in mind and wanted a HF antenna on this is a great solution.
Direct links below
And just a reminder please if you plan to order use Discount Code pilgrimsmaster for a nice discount