I think that will end up causing some confusion, such as when Rosco thought Otto’s flex was the strip formal, when it’s the large disc one.
This comes because xSeries always come in a single form factor, but flex…
even if wedge get’s decommissioned, there’s still a fairly large amount of formats out there which fit the “flex” tag… 
This data is actually really useful for this Thread!
Those are almost consistent with my “old” flex DF2 reading range on ACR122U. 15mm is a distance from which almost any angle reads, but I do achieve 30mm+ successful reads with it.
Since I would expect the larger antenna to perform better than the old one, then the MagicNtag chip definitely eats out range more than I assumed during my initial write up.
Uhuu!! looking forward! 
That is an interesting test.
Although not indicative of this chip’s particular results, when I ran tests on my DF I got the following conclusion (I didn’t put much effort into testing though):
- Using TagInfo, there was no full scan time difference between differing NDEF lengths. (using other methods yes, but not on TagInfo’s full scan)
And on that note, my DF gets a full scan in roughly less than half a second, while my MN takes a good 3 seconds.