# Prosthetic Enhancement, aka Inspector Gadget Finger

**URL:** <https://forum.dangerousthings.com/t/prosthetic-enhancement-aka-inspector-gadget-finger/28410>\
**Category:** Projects\
**Created:** [July 11, 2026, 3:50pm UTC](https://forum.dangerousthings.com/t/prosthetic-enhancement-aka-inspector-gadget-finger/28410 "2026-07-11T15:50:26Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![Pilgrimsmaster](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/pilgrimsmaster/32/1179_2.png) [@Pilgrimsmaster](https://forum.dangerousthings.com/u/Pilgrimsmaster)\
**Post date:** [July 11, 2026, 9:46pm UTC](https://forum.dangerousthings.com/t/prosthetic-enhancement-aka-inspector-gadget-finger/28410/3 "2026-07-11T21:46:15Z")

</div>

> [@ThisDesign](#):
>
> Rather than dwell on the loss, I am trying to make the experience and story a biological improvement

Great attitude

> [@ThisDesign](#):
>
> I also started playing with a Flipper

Perfect foundation

> [@ThisDesign](#):
>
> before shortening my reach.

😆 🤣😆 🤣

Your title mentions prosthetics

You might be interested in Ian Davis (if you are not already aware)

> **[Ian Davis](https://www.youtube.com/@missingpartsclub?si=74mvQM2cvua6vH0g)**
>
> This channel is dedicated to my journey to improve the scope and diversity of what is available in the marketplace for partial hand amputees.
> For more updates please check out my Instagram and Patreon.
> 
> 
> https://forgeprostheticdevices.com

If you go down the prosthetic route, we can certainly help you with your projects incorporating RFID into them.

The prosthetic may potentially provide you with advantages us “normy reachies” dont get.

> [@ThisDesign](#):
>
> Does this all sound correct?

YUP

and all your projects sound do-able.

I’m inbetween airports at the moment so I cant fully reply at the moment.

a couple of quick bullet points,

- The UHF in key fobs we can work around, but incorporating the keyfobs into the design.  
Here is my first link as a suggestion to get you started down the right track

> [@Using implant with factory keyless open and start](https://forum.dangerousthings.com/t/using-implant-with-factory-keyless-open-and-start/7757):
>
> I got myself a car with keyless entry and pushbutton start. But carrying a fob is so 2010. Actually I’m really worried I’m going to lose it. It falls out of my pocket so easily. The idea is use an RFID access controller and build an interface between it and the fob The interface controller will control the power to the fob as well as the lock/unlock. A fob will need to be dedicated to it and be left installed in the car somewhere Challenges: The car senses when the (powered) fob is in th…

- The payment- will depend on what country you are in, BUT the prosthetic may open up other options

> [@ThisDesign](#):
>
> Kwikset smart lock | Depends on model | 125 kHz or 13.56 MHz

Use your flipper to scan the fob and let us know which one you have.

More info to come, there will be others here that will be able to give you some great advice

Implant suggestions will come in time once we have more info from you.

For now, I would suggest getting started with a [test card pack](https://dangerousthings.com/product/card-pack/). (always better to test on cheaper cards rather than your implant(s))  
In the [test card pack](https://dangerousthings.com/product/card-pack/) link, you will find some extra options

J3R180

[UG4](https://dangerousthings.com/product/flexug4/)

gen3

Unless you have a specific need for it, which at the moment it doesn’t look like you do, you wont need the gen3.

The J3R180 is a **Possible** , but rather than that, you may be better off getting an APEX (same same but differnet, but APEX may be your payment option)

The [UG4](https://dangerousthings.com/product/flexug4/) is a nice add on, as it is the best magic card avaliable and may be a solution for some of your projects.  
Also, the Flipper is now more capable of playing with these.

> [@Ultimate magic 2 flipper](https://forum.dangerousthings.com/t/ultimate-magic-2-flipper/28106/4):
>
> Pull request opened! Wish me good luck

One more thing for you to consider, is a [PM3](https://dangerousthings.com/product/proxmark3-easy/), The Flipper is capable of most HF and LF RFID diagnostics, but the [PM3](https://dangerousthings.com/product/proxmark3-easy/) has some added functionality (there is a learning curve and not as plug n play as the flipper, but another good investment)

I generally use my Flipper for MOST things, but sometimes I need my [PM3](https://dangerousthings.com/product/proxmark3-easy/).

That’s probably me for now…🛫

> [@ThisDesign](#):
>
> just looking for a positive outcome to promote optimism.

You are off to a great start

---

_[View the full topic](https://forum.dangerousthings.com/t/prosthetic-enhancement-aka-inspector-gadget-finger/28410)._
