# Qi chargers and xLed LF

**URL:** <https://forum.dangerousthings.com/t/qi-chargers-and-xled-lf/6593>\
**Category:** Support\
**Created:** [April 26, 2020, 7:38am UTC](https://forum.dangerousthings.com/t/qi-chargers-and-xled-lf/6593 "2020-04-26T07:38:10Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![cbsevilha](https://forum.dangerousthings.com/letter_avatar_proxy/v4/letter/c/df705f/32.png) [@cbsevilha](https://forum.dangerousthings.com/u/cbsevilha)\
**Post date:** [April 26, 2020, 7:38am UTC](https://forum.dangerousthings.com/t/qi-chargers-and-xled-lf/6593/1 "2020-04-26T07:38:10Z")

</div>

Hi everyone,

I know Qi chargers, wireless phone chargers, can light the [xLed](https://dangerousthings.com/product/xLED/) LF, but I wonder if its safe to the led itself and the coil. Can it burn the [xLed](https://dangerousthings.com/product/xLED/) implant and make it useless?

---

<div class="post-metadata">

**Author:** ![NiamhAstra](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/niamhastra/32/2933_2.png) [@NiamhAstra](https://forum.dangerousthings.com/u/NiamhAstra)\
**Post date:** [April 26, 2020, 7:39am UTC](https://forum.dangerousthings.com/t/qi-chargers-and-xled-lf/6593/2 "2020-04-26T07:39:53Z")

</div>

This thread had some information

> [@xLED and Wireless Charging Pad](https://forum.dangerousthings.com/t/xled-and-wireless-charging-pad/4439/8):
>
> The Wireless Power Consortium (Qi) is the most common type of charger you’ll encounter. Over their lifespan, the specification has allowed manufacturers to produce devices that operate anywhere between 80kHz-300kHz, so only a LF [xLED](https://dangerousthings.com/product/xLED/) could be affected. I’m currently working on testing the FOD on some cheap Qi chargers to see if they’ll burn-out a LF [xLED](https://dangerousthings.com/product/xLED/) if you really try. For now though, know that the HF [xLED](https://dangerousthings.com/product/xLED/) is safe from wireless chargers that operate on the Qi or Airfuel standards.

You could check with @Satur9 to see if he had any updates.

---

<div class="post-metadata">

**Author:** ![Satur9](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/satur9/32/948_2.png) [@Satur9](https://forum.dangerousthings.com/u/Satur9)\
**Post date:** [April 26, 2020, 3:52pm UTC](https://forum.dangerousthings.com/t/qi-chargers-and-xled-lf/6593/3 "2020-04-26T15:52:48Z")

</div>

> [@cbsevilha](#):
>
> Can it burn the [xLed](https://dangerousthings.com/product/xLED/) implant and make it useless?

I could not get any of the three cheap wireless chargers I tried to couple with an [xLED](https://dangerousthings.com/product/xLED/) and fry it, the [xLED](https://dangerousthings.com/product/xLED/) just showed short flashes from the detection pulses. That being said, a Qi wireless charger operating near 125kHz _could_ fry an [xLED](https://dangerousthings.com/product/xLED/) if you could get them to couple. It definitely will fry the delicate LED on the LF side of your DT [Diagnostic Card](https://dangerousthings.com/product/rdc/) if you leave it on there for a few minutes, so keep that clear of the field.

Unfortunately, to know for sure we would need a ton of people to use their X Field Detectors to test out dozens of different wireless charging modules.

I’ll post a video later.

---

<div class="post-metadata">

**Author:** ![cbsevilha](https://forum.dangerousthings.com/letter_avatar_proxy/v4/letter/c/df705f/32.png) [@cbsevilha](https://forum.dangerousthings.com/u/cbsevilha)\
**Post date:** [April 26, 2020, 4:37pm UTC](https://forum.dangerousthings.com/t/qi-chargers-and-xled-lf/6593/4 "2020-04-26T16:37:05Z")

</div>

Thanks… well, I asked that because I could use some Qi chargers to light my [xLed](https://dangerousthings.com/product/xLED/), but I saw that it lights much more than the HF [xLed](https://dangerousthings.com/product/xLED/) on a HF field. And I actually burned rhe lf led on my test card, the black on with both frequencies. But, it didnt burned the [xLed](https://dangerousthings.com/product/xLED/) attached to the card.

---

<div class="post-metadata">

**Author:** ![fraggersparks](https://forum.dangerousthings.com/letter_avatar_proxy/v4/letter/f/13edae/32.png) [@fraggersparks](https://forum.dangerousthings.com/u/fraggersparks)\
**Post date:** [April 27, 2020, 1:18am UTC](https://forum.dangerousthings.com/t/qi-chargers-and-xled-lf/6593/5 "2020-04-27T01:18:53Z")

</div>

Had this occur on the LF on mine too.

---

<div class="post-metadata">

**Author:** ![Dean](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/dean/32/1319_2.png) [@Dean](https://forum.dangerousthings.com/u/Dean)\
**Post date:** [April 27, 2020, 5:49am UTC](https://forum.dangerousthings.com/t/qi-chargers-and-xled-lf/6593/6 "2020-04-27T05:49:24Z")

</div>

I would strongly recommend against it. I was playing with a Qi charger and my LF [XLED](https://dangerousthings.com/product/xLED/) and it no longer makes the blinky TT\_TT

Haven’t gotten around to yanking it yet.
