RFID Implant Motorcycle Ignition

[amal]

It’s been covered a few times here on the forum…

xEM motorcycle wiring

I connected my xac and relays to power through the engine run switch… repurposing it. The original engine run wires were connected to a simple reed relay which was powered on by the engine run switch… does that make sense? Basically the engine run switch connected power to the reed relay (connecting the original engine run wires that were connected to the engine run switch), and to the xac and power bus for dpdt latching relay and the automotive relays used to supplement the key switch. The re…

Ideas for controlling locking mechanism on electric scooter?

Guys… honestly… just use the dpdt… it’s easy; [dpdt-relay] Here’s how you wire it up to be self-latching; [dpdt-latch] Basically you use one of the throws to self-latch, and the other to control whatever you want to control. The diode protects the XAC from current feeding back through the output wire and destroying the XAC. The switch should be the main power switch on the bike or scooter or whatever… so when you turn the main power switch on, the XAC gets power but the relay is dead. Once…