# The Blue Cloner is back, new and improved!

**URL:** <https://forum.dangerousthings.com/t/the-blue-cloner-is-back-new-and-improved/7567>\
**Category:** Dangerous Announcements\
**Created:** [July 23, 2020, 11:49pm UTC](https://forum.dangerousthings.com/t/the-blue-cloner-is-back-new-and-improved/7567 "2020-07-23T23:49:53Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![amal](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/amal/32/37192_2.png) [@amal](https://forum.dangerousthings.com/u/amal)\
**Post date:** [July 23, 2020, 11:49pm UTC](https://forum.dangerousthings.com/t/the-blue-cloner-is-back-new-and-improved/7567/1 "2020-07-23T23:49:53Z")

</div>

[https://dangerousthings.com/product/blue-cloner/](https://dangerousthings.com/product/blue-cloner/)

Hey everyone, the [blue cloner](https://dangerousthings.com/product/blue-cloner/) is making a come-back… only this time it supports 3 different types of chip IDs! We’ve been able to get the firmware to support EM410x, EM42xx, HID ProxCard, and AWiD cards too!

[![](https://img.youtube.com/vi/Q4t7bnzQJLs/maxresdefault.jpg "Introduction to the DT Blue Cloner") ](https://www.youtube.com/watch?v=Q4t7bnzQJLs)

---

<div class="post-metadata">

**Author:** ![Backpackingvet](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/backpackingvet/32/22366_2.png) [@Backpackingvet](https://forum.dangerousthings.com/u/Backpackingvet)\
**Post date:** [July 23, 2020, 11:54pm UTC](https://forum.dangerousthings.com/t/the-blue-cloner-is-back-new-and-improved/7567/2 "2020-07-23T23:54:02Z")

</div>

Perfect for a layman like me.

---

<div class="post-metadata">

**Author:** ![anon3825968](https://forum.dangerousthings.com/letter_avatar_proxy/v4/letter/a/9d8465/32.png) [@anon3825968](https://forum.dangerousthings.com/u/anon3825968)\
**Post date:** [July 24, 2020, 12:31am UTC](https://forum.dangerousthings.com/t/the-blue-cloner-is-back-new-and-improved/7567/3 "2020-07-24T00:31:23Z")

</div>

Is that the regular 3-beep one, or something even newer?

---

<div class="post-metadata">

**Author:** ![amal](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/amal/32/37192_2.png) [@amal](https://forum.dangerousthings.com/u/amal)\
**Post date:** [July 24, 2020, 1:06am UTC](https://forum.dangerousthings.com/t/the-blue-cloner-is-back-new-and-improved/7567/4 "2020-07-24T01:06:17Z")

</div>

This one supports AWiD as well!

---

<div class="post-metadata">

**Author:** ![rero\_fox](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/rero_fox/32/8564_2.png) [@rero\_fox](https://forum.dangerousthings.com/u/rero_fox)\
**Post date:** [July 24, 2020, 1:16am UTC](https://forum.dangerousthings.com/t/the-blue-cloner-is-back-new-and-improved/7567/5 "2020-07-24T01:16:26Z")

</div>

Here’s a random idea:

On the housing, cut the front off so that the antenna is always exposed, so you don’t need to open it for better range.

---

<div class="post-metadata">

**Author:** ![amal](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/amal/32/37192_2.png) [@amal](https://forum.dangerousthings.com/u/amal)\
**Post date:** [July 24, 2020, 1:42am UTC](https://forum.dangerousthings.com/t/the-blue-cloner-is-back-new-and-improved/7567/6 "2020-07-24T01:42:22Z")

</div>

![tenor (10)](https://forum.dangerousthings.com/uploads/default/original/2X/7/7771e6c8bb0885807aa95b7c1319742d59539892.gif)

![tenor (11)](https://forum.dangerousthings.com/uploads/default/original/2X/7/7876b6a058bd4831830b34edf51e797d1e8129b6.gif)

![tenor (12)](https://forum.dangerousthings.com/uploads/default/original/2X/1/182bebd03d201afcf52a29a6d9c13ad2a90eaf41.gif)

Some also talk about taking the antenna out and just putting it on the outside with wires through a notch.

---

<div class="post-metadata">

**Author:** ![anon3825968](https://forum.dangerousthings.com/letter_avatar_proxy/v4/letter/a/9d8465/32.png) [@anon3825968](https://forum.dangerousthings.com/u/anon3825968)\
**Post date:** [July 24, 2020, 2:57am UTC](https://forum.dangerousthings.com/t/the-blue-cloner-is-back-new-and-improved/7567/7 "2020-07-24T02:57:08Z")

</div>

Or you can do [this](https://forum.dangerousthings.com/t/the-hot-wire-blue-cloner-mod/7267).

 ![05-Enclosure_closed-front](https://forum.dangerousthings.com/uploads/default/original/2X/2/238a3f2b6eb42aeb28d072b6859dca944ad021c8.jpeg)

---

<div class="post-metadata">

**Author:** ![rero\_fox](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/rero_fox/32/8564_2.png) [@rero\_fox](https://forum.dangerousthings.com/u/rero_fox)\
**Post date:** [July 24, 2020, 4:14am UTC](https://forum.dangerousthings.com/t/the-blue-cloner-is-back-new-and-improved/7567/8 "2020-07-24T04:14:27Z")

</div>

Not a bad idea actually

---

<div class="post-metadata">

**Author:** ![Eriequiet](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/eriequiet/32/6437_2.png) [@Eriequiet](https://forum.dangerousthings.com/u/Eriequiet)\
**Post date:** [July 24, 2020, 5:48am UTC](https://forum.dangerousthings.com/t/the-blue-cloner-is-back-new-and-improved/7567/9 "2020-07-24T05:48:25Z")

</div>

Just as I learn to use this stupid proxmark _glare_  
Lol more options always better I guess

I’ll probably grab one and re orient the antenna like you did that’s a nice touch

---

<div class="post-metadata">

**Author:** ![anon3825968](https://forum.dangerousthings.com/letter_avatar_proxy/v4/letter/a/9d8465/32.png) [@anon3825968](https://forum.dangerousthings.com/u/anon3825968)\
**Post date:** [July 24, 2020, 6:09am UTC](https://forum.dangerousthings.com/t/the-blue-cloner-is-back-new-and-improved/7567/10 "2020-07-24T06:09:51Z")

</div>

The Proxmark is much more versatile, and probably safer provided you use a ProxLF coil. But it’s 30x the price (with the ProxLF antenna factored in) 🙂

---

<div class="post-metadata">

**Author:** ![Eriequiet](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/eriequiet/32/6437_2.png) [@Eriequiet](https://forum.dangerousthings.com/u/Eriequiet)\
**Post date:** [July 24, 2020, 6:10am UTC](https://forum.dangerousthings.com/t/the-blue-cloner-is-back-new-and-improved/7567/11 "2020-07-24T06:10:54Z")

</div>

Can’t use the lf coil with an [pm3](https://dangerousthings.com/product/proxmark3-easy/) easy

If I had known there were clones of the higher end version I might have done that

---

<div class="post-metadata">

**Author:** ![anon3825968](https://forum.dangerousthings.com/letter_avatar_proxy/v4/letter/a/9d8465/32.png) [@anon3825968](https://forum.dangerousthings.com/u/anon3825968)\
**Post date:** [July 24, 2020, 6:50am UTC](https://forum.dangerousthings.com/t/the-blue-cloner-is-back-new-and-improved/7567/12 "2020-07-24T06:50:31Z")

</div>

Ah yes, that’s a bummer. OTOH you can find howtos to make a LF coil for the [PM3](https://dangerousthings.com/product/proxmark3-easy/) easy I think.

---

<div class="post-metadata">

**Author:** ![Pilgrimsmaster](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/pilgrimsmaster/32/1179_2.png) [@Pilgrimsmaster](https://forum.dangerousthings.com/u/Pilgrimsmaster)\
**Post date:** [July 24, 2020, 8:33am UTC](https://forum.dangerousthings.com/t/the-blue-cloner-is-back-new-and-improved/7567/13 "2020-07-24T08:33:35Z")

</div>

Amal  
have you tested whether this new [Blue cloner](https://dangerousthings.com/product/blue-cloner/) puts the **51243648** pin on it?

---

<div class="post-metadata">

**Author:** ![Compgeek](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/compgeek/32/3800_2.png) [@Compgeek](https://forum.dangerousthings.com/u/Compgeek)\
**Post date:** [July 24, 2020, 8:42am UTC](https://forum.dangerousthings.com/t/the-blue-cloner-is-back-new-and-improved/7567/14 "2020-07-24T08:42:41Z")

</div>

> [@Pilgrimsmaster](#):
>
> have you tested whether this new [Blue cloner](https://dangerousthings.com/product/blue-cloner/) puts the **51243648** pin on it?

Curious on this too, would like to have one that doesn’t set a password at all!

---

<div class="post-metadata">

**Author:** ![darkdragon885](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/darkdragon885/32/5248_2.png) [@darkdragon885](https://forum.dangerousthings.com/u/darkdragon885)\
**Post date:** [July 24, 2020, 1:29pm UTC](https://forum.dangerousthings.com/t/the-blue-cloner-is-back-new-and-improved/7567/15 "2020-07-24T13:29:07Z")

</div>

Its up on the site and the description says it still sets a password.  
_The [Blue Cloner](https://dangerousthings.com/product/blue-cloner/) will write the source ID to your [T5577](https://dngr.us/T5577) based product, then set a password after writing. This protects the target [T5577](https://dngr.us/T5577) chip from other malicious writers, but it also means your target chip requires a password to write data to it again. This does not affect the [Blue Cloner](https://dangerousthings.com/product/blue-cloner/) – it will continue to function properly – but if you wish to write to your [T5577](https://dngr.us/T5577) chip using any other writer, you will need to ensure the writer can authenticate first using the password 51243648._

---

<div class="post-metadata">

**Author:** ![anon3825968](https://forum.dangerousthings.com/letter_avatar_proxy/v4/letter/a/9d8465/32.png) [@anon3825968](https://forum.dangerousthings.com/u/anon3825968)\
**Post date:** [July 24, 2020, 2:25pm UTC](https://forum.dangerousthings.com/t/the-blue-cloner-is-back-new-and-improved/7567/16 "2020-07-24T14:25:33Z")

</div>

I hate devices that try to be too clever. Here the password thing is exceptionally stupid, because either it’s secret and you’re locked out of your chip after the cloner is done writing, or it’s public (as is the case here) and it’s just a minor extra annoyance if you’re a maker of “malicious writers”.

---

<div class="post-metadata">

**Author:** ![Pilgrimsmaster](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/pilgrimsmaster/32/1179_2.png) [@Pilgrimsmaster](https://forum.dangerousthings.com/u/Pilgrimsmaster)\
**Post date:** [July 24, 2020, 8:14pm UTC](https://forum.dangerousthings.com/t/the-blue-cloner-is-back-new-and-improved/7567/17 "2020-07-24T20:14:08Z")

</div>

> [@darkdragon885](#):
>
> Its up on the site and the description says it still sets a password.

Holy fuck, how did I miss that???

- Maybe because it was right at the bottom and I got distracted by the purdy YouTube video above it ?

- Maybe I thought it was just an artifact leftover from the previous webstore listing?

- Maybe I just became one of **“those people”** who just ask instead of trying to find the info themselves?

Eitherway, to atone for my sins and make amends, hopefully I can reduce the shame I have brought on my family.

Here is the command line  
**lf t55xx write b 0 d \*\*\*\*\*\*\*\* p 51243648**

Now, I shall step outside and commit sepuku.

![tenor (27)](https://forum.dangerousthings.com/uploads/default/original/2X/d/d5889e4023c7bf52d1daa00d863c53f2723645f4.gif)

---

<div class="post-metadata">

**Author:** ![yeka](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/yeka/32/5459_2.png) [@yeka](https://forum.dangerousthings.com/u/yeka)\
**Post date:** [July 28, 2020, 1:59pm UTC](https://forum.dangerousthings.com/t/the-blue-cloner-is-back-new-and-improved/7567/18 "2020-07-28T13:59:57Z")

</div>

Just cloned my work badge to my [NExT](https://dangerousthings.com/product/next/).  
It works.  
Awesome, only thing left is to replace 1 lock…

---

<div class="post-metadata">

**Author:** ![locksmith31](https://forum.dangerousthings.com/letter_avatar_proxy/v4/letter/l/2acd7d/32.png) [@locksmith31](https://forum.dangerousthings.com/u/locksmith31)\
**Post date:** [July 29, 2020, 7:24pm UTC](https://forum.dangerousthings.com/t/the-blue-cloner-is-back-new-and-improved/7567/19 "2020-07-29T19:24:24Z")

</div>

> [@Pilgrimsmaster](#):
>
> Here is the command line  
> **lf t55xx write b 0 d \*\*\*\*\*\*\*\* p 51243648**

I’m assuming this is the command line you’d find if you were to write to the chip with a [blue cloner](https://dangerousthings.com/product/blue-cloner/) then read it with a [PM3](https://dangerousthings.com/product/proxmark3-easy/)… for the purpose of deleting it and thus removing the password? Sorry for the confusion, I’m pretty new to all of the RFID programming stuff 😅

Follow-up question, if you intend to only use the [blue cloner](https://dangerousthings.com/product/blue-cloner/) and not upgrade or switch cloning/writing devices, what harm does the password do, even if it’s viewable as was mentioned earlier?

---

<div class="post-metadata">

**Author:** ![Satur9](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/satur9/32/948_2.png) [@Satur9](https://forum.dangerousthings.com/u/Satur9)\
**Post date:** [July 29, 2020, 8:29pm UTC](https://forum.dangerousthings.com/t/the-blue-cloner-is-back-new-and-improved/7567/20 "2020-07-29T20:29:28Z")

</div>

> [@locksmith31](#):
>
> I’m assuming this is the commend line you’d find if you were to write to the chip with a [blue cloner](https://dangerousthings.com/product/blue-cloner/) then read it with a [PM3](https://dangerousthings.com/product/proxmark3-easy/)… for the purpose of deleting it and thus removing the password?

That’s the command you would use on a proxmark to write a new ID to an [xEM](https://dngr.us/xem) or the LF side of the [NExT](https://dangerousthings.com/product/next/) if you had already written to it with a [blue cloner](https://dangerousthings.com/product/blue-cloner/) which had password protected it. You would have to issue the command like that every time you wanted to write a new ID.

> [@locksmith31](#):
>
> Follow-up question, if you intend to only use the [blue cloner](https://dangerousthings.com/product/blue-cloner/) and not upgrade or switch cloning/writing devices, what harm does the password do, even if it’s viewable as was mentioned earlier?

It doesn’t do any harm, as long as you always use a [blue cloner](https://dangerousthings.com/product/blue-cloner/) that has that specific password and you’re needs are addressed by the limited tag brands that a [blue cloner](https://dangerousthings.com/product/blue-cloner/) supports (HID or EM). Lots of implantees want more than that, though. For example, my workplace uses a different type of LF system. The [blue cloner](https://dangerousthings.com/product/blue-cloner/) wouldn’t work for me, and testing it out could lock my implant down so that I _have_ to buy a proxmark, or get it removed. That’s not even considering the data tearing issues that the poor antenna coupling can cause.

[Next page](https://forum.dangerousthings.com/t/the-blue-cloner-is-back-new-and-improved/7567.md?page=2)
