# Wanting advice about the NeXT implant

**URL:** <https://forum.dangerousthings.com/t/wanting-advice-about-the-next-implant/8512>\
**Category:** Support\
**Created:** [October 13, 2020, 10:18pm UTC](https://forum.dangerousthings.com/t/wanting-advice-about-the-next-implant/8512 "2020-10-13T22:18:04Z")\
**Posts on this page:** 13\
**Page:** 1

<div class="post-metadata">

**Author:** ![stegelast0](https://forum.dangerousthings.com/letter_avatar_proxy/v4/letter/s/76d3ee/32.png) [@stegelast0](https://forum.dangerousthings.com/u/stegelast0)\
**Post date:** [October 13, 2020, 10:18pm UTC](https://forum.dangerousthings.com/t/wanting-advice-about-the-next-implant/8512/1 "2020-10-13T22:18:04Z")

</div>

Hello all!

I’m thinking of getting a NeXT implant and want to know a few things about it before putting it in my body.

My use case for this device would be to clone existing cards so I can use the implant instead of them, what do I need to be able to clone the cards?

Are there different devices needed for different card specifications?

How can I test that the clone worked?

Thank you!!! 🙂

Update: So from my research so far, the [NExT](https://dangerousthings.com/product/next/) chip is a single chip which allows both 125khz and 13.56mhz on a single chip, to clone data from one card to another I can use the [blue cloner](https://dangerousthings.com/product/blue-cloner/) for 125khz and a phone for 13.56mhz

---

<div class="post-metadata">

**Author:** ![Eriequiet](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/eriequiet/32/6437_2.png) [@Eriequiet](https://forum.dangerousthings.com/u/Eriequiet)\
**Post date:** [October 13, 2020, 10:27pm UTC](https://forum.dangerousthings.com/t/wanting-advice-about-the-next-implant/8512/2 "2020-10-13T22:27:03Z")

</div>

Have a next in my wrist  
Couple things

There are several devices you could use but it comes down to either a [proxmark3](https://dngr.us/pm3) or a China [blue cloner](https://dangerousthings.com/product/blue-cloner/)

The proxmark let’s you get into the nitty gritty, but is dangerously close to coding, and hurts my brain at times will work for 125khz and 13.56mhz  
Expensive… unless you get the “easy” version which has its own draw backs

The [blue cloner](https://dangerousthings.com/product/blue-cloner/) is 2-3 buttons, read/write  
But it doesn’t work on every version of 125khz  
But it does work on the most common 3  
It places a password on the chip after it writes, but If all you use is the cloner, the cloner knows it’s own password which is something commonly known like 1234567890  
Very cheap

The [blue cloner](https://dangerousthings.com/product/blue-cloner/) gets some flak because the [t5577](https://dngr.us/T5577) side of the next doesn’t have tear protection, meaning if you hit the write button and move to early, it won’t write everything correctly, and can semi or fully brick your chip

There is a mod I plan to copy, where the antenna is reorientated to get better coupling to the chip

Important thing to note, you will only be able to use 1 ID per side of the next, so 1 125kz uid and 1 13.56mhz uid

If you have more than 1 of each system you will need to enroll the uid into each system

In regards to the 13.56 side, you can do a lot of programming from your cellphone since most are nfc compatible but there are some cellphones that lack nfc (old)

> [@stegelast0](#):
>
> How can I test that the clone worked?

I mean, if you have a device (besides the [blue cloner](https://dangerousthings.com/product/blue-cloner/)) that can write… more than likely it can read  
So you could just read the chip info to see if it looks correct

… but there’s only one ☝ way to really know lol

Stick your hand in front of a reader lol

---

<div class="post-metadata">

**Author:** ![stegelast0](https://forum.dangerousthings.com/letter_avatar_proxy/v4/letter/s/76d3ee/32.png) [@stegelast0](https://forum.dangerousthings.com/u/stegelast0)\
**Post date:** [October 13, 2020, 10:35pm UTC](https://forum.dangerousthings.com/t/wanting-advice-about-the-next-implant/8512/3 "2020-10-13T22:35:27Z")

</div>

Thank you, this clears up a few questions I had about it… but has also caused more.

1. You said the [t5577](https://dngr.us/T5577) doesn’t have tear protection, would you be able to elaborate on it? I am a tad confused as to what that means.

2. You said the cloner puts a password on the chip after cloning, again would you be able to elaborate on this.

3. You said I will only be able to use 1 ID per side of the NeXT, that makes sense but what you said below that confuses me too.

tl;dr could you elaborate on the topics above and/or explain them to me in basic terms?

Thank you for the help!

---

<div class="post-metadata">

**Author:** ![yeka](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/yeka/32/5459_2.png) [@yeka](https://forum.dangerousthings.com/u/yeka)\
**Post date:** [October 13, 2020, 10:40pm UTC](https://forum.dangerousthings.com/t/wanting-advice-about-the-next-implant/8512/4 "2020-10-13T22:40:08Z")

</div>

> [@stegelast0](#):
>
> what do I need to be able to clone the cards?

At first the type of your card would be interesting, then you should choose the correct implant for that.

So, have you scanned the cards with your phone? [NFC Tools](https://play.google.com/store/apps/details?id=com.wakdev.wdnfc&hl=en) or Tag Reader. Does it show anything?

> [@stegelast0](#):
>
> You said the cloner puts a password on the chip after cloning, again would you be able to elaborate on this.

The cloner sets a password so you need the password (or the cloner) to overwrite it again.

> [@stegelast0](#):
>
> You said the [t5577](https://dngr.us/T5577) doesn’t have tear protection, would you be able to elaborate on it? I am a tad confused as to what that means.

Cloners can brick chips because they dont couple well (magnetic field magic).  
In most cases they can be repaired if using a tool with a proper antenna later.

---

<div class="post-metadata">

**Author:** ![stegelast0](https://forum.dangerousthings.com/letter_avatar_proxy/v4/letter/s/76d3ee/32.png) [@stegelast0](https://forum.dangerousthings.com/u/stegelast0)\
**Post date:** [October 13, 2020, 10:42pm UTC](https://forum.dangerousthings.com/t/wanting-advice-about-the-next-implant/8512/5 "2020-10-13T22:42:45Z")

</div>

I have not scanned the card yet. I will do it now.

---

<div class="post-metadata">

**Author:** ![yeka](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/yeka/32/5459_2.png) [@yeka](https://forum.dangerousthings.com/u/yeka)\
**Post date:** [October 13, 2020, 10:44pm UTC](https://forum.dangerousthings.com/t/wanting-advice-about-the-next-implant/8512/6 "2020-10-13T22:44:10Z")

</div>

Kk hit us up with results then.  
Also, have you seen this yet?

> [@WIKI - BEGINNERS GUIDE to implants & becoming a cyborg robot](https://forum.dangerousthings.com/t/wiki-beginners-guide-to-implants-becoming-a-cyborg/5170):
>
> BEGINNERS GUIDE TO IMPLANTS syringe & BECOMING A CYBORG robot The purpose of this [WIKI](https://forum.dangerousthings.com/c/info/wikis/10) is to explain the BASICS to anybody looking into getting their first implant in a clear, concise, condensed [WIKI](https://forum.dangerousthings.com/c/info/wikis/10). The “bite-sized chunks” cookie are to simplify the overwhelming amount of information, and provide you with an abridged version… One topic at a time 
> 
> > **ABOUT & TERMINOLOGY**
> >
> > There are 2 MAIN frequencies Low Frequency ( LF ) 125 kHz A lot of access systems use this High Frequency ( HF )…

The [wiki](https://forum.dangerousthings.com/c/info/wikis/10) is a great resource!

---

<div class="post-metadata">

**Author:** ![stegelast0](https://forum.dangerousthings.com/letter_avatar_proxy/v4/letter/s/76d3ee/32.png) [@stegelast0](https://forum.dangerousthings.com/u/stegelast0)\
**Post date:** [October 13, 2020, 10:52pm UTC](https://forum.dangerousthings.com/t/wanting-advice-about-the-next-implant/8512/7 "2020-10-13T22:52:15Z")

</div>

Update: so I attempted to scan 2 cards with the [NFC tools](https://play.google.com/store/apps/details?id=com.wakdev.wdnfc&hl=en) app. One worked, the other didn’t.

The card that worked showed this info: Tag Type: ISO 14443-4

I suspect that the other card didn’t work because it might have been 125khz?

---

<div class="post-metadata">

**Author:** ![yeka](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/yeka/32/5459_2.png) [@yeka](https://forum.dangerousthings.com/u/yeka)\
**Post date:** [October 13, 2020, 10:54pm UTC](https://forum.dangerousthings.com/t/wanting-advice-about-the-next-implant/8512/8 "2020-10-13T22:54:03Z")

</div>

> [@stegelast0](#):
>
> I suspect that the other card didn’t work because it might have been 125khz?

Very likely, [NExT](https://dangerousthings.com/product/next/) LF Side or [xEM](https://dngr.us/xem) will probably be the right for this.

> [@stegelast0](#):
>
> The card that worked showed this info: Tag Type: ISO 14443-4

Ugh Tag Reader screenshot pls? (If you want you can censor your ID!)

---

<div class="post-metadata">

**Author:** ![stegelast0](https://forum.dangerousthings.com/letter_avatar_proxy/v4/letter/s/76d3ee/32.png) [@stegelast0](https://forum.dangerousthings.com/u/stegelast0)\
**Post date:** [October 13, 2020, 10:56pm UTC](https://forum.dangerousthings.com/t/wanting-advice-about-the-next-implant/8512/9 "2020-10-13T22:56:08Z")

</div>

It showed no ID, I assume you mean the serial number?

---

<div class="post-metadata">

**Author:** ![yeka](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/yeka/32/5459_2.png) [@yeka](https://forum.dangerousthings.com/u/yeka)\
**Post date:** [October 13, 2020, 10:56pm UTC](https://forum.dangerousthings.com/t/wanting-advice-about-the-next-implant/8512/10 "2020-10-13T22:56:43Z")

</div>

Yeah you may wanna keep that private.

---

<div class="post-metadata">

**Author:** ![stegelast0](https://forum.dangerousthings.com/letter_avatar_proxy/v4/letter/s/76d3ee/32.png) [@stegelast0](https://forum.dangerousthings.com/u/stegelast0)\
**Post date:** [October 13, 2020, 10:57pm UTC](https://forum.dangerousthings.com/t/wanting-advice-about-the-next-implant/8512/11 "2020-10-13T22:57:48Z")

</div>

![image1](https://dangerousthings-forum.b-cdn.net/original/2X/5/54e5f08ece7b07cbedd9ec2f05e91c070d2bacab.png)

This card would be nice to clone, but not needed, the main one I want to clone is the 125khz one.

---

<div class="post-metadata">

**Author:** ![yeka](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/yeka/32/5459_2.png) [@yeka](https://forum.dangerousthings.com/u/yeka)\
**Post date:** [October 13, 2020, 11:00pm UTC](https://forum.dangerousthings.com/t/wanting-advice-about-the-next-implant/8512/12 "2020-10-13T23:00:21Z")

</div>

> [@stegelast0](#):
>
> the main one I want to clone is the 125khz one.

I’d say grab a [NExT](https://dangerousthings.com/product/next/) and [blue cloner](https://dangerousthings.com/product/blue-cloner/) then 🙂

Others would need to help you with the HF card, they’d probably need a Tag Reader screenshot.  
I’m off, g’night!

---

<div class="post-metadata">

**Author:** ![Pilgrimsmaster](https://forum.dangerousthings.com/user_avatar/forum.dangerousthings.com/pilgrimsmaster/32/1179_2.png) [@Pilgrimsmaster](https://forum.dangerousthings.com/u/Pilgrimsmaster)\
**Post date:** [October 13, 2020, 11:10pm UTC](https://forum.dangerousthings.com/t/wanting-advice-about-the-next-implant/8512/13 "2020-10-13T23:10:37Z")

</div>

the problem with [NFC Tools](https://play.google.com/store/apps/details?id=com.wakdev.wdnfc&hl=en) is, it is not particularly good at accurately identifying Chips.  
If you download [TagInfo](https://forum.dangerousthings.com/t/how-to-share-nfc-chip-data-via-taginfo-app) by NXP that will give you a better idea of what you are looking at.

Grab that app and upload it here so we can help you out

> [@How to share NFC chip data via TagInfo app](https://forum.dangerousthings.com/t/how-to-share-nfc-chip-data-via-taginfo-app/5262):
>
> [TagInfo](https://forum.dangerousthings.com/t/how-to-share-nfc-chip-data-via-taginfo-app) is an app made by a chip manufacturing company called NXP. It does a decent job of determining the type of chip it’s talking to and fully scanning any accessible memory into a scan report. It also makes sharing information gathered easy, which makes diagnosing problems or answering questions about specific NFC tags one might have much more efficient. Android iPhone [[Sharing microchip implant data with TagInfo] ](https://www.youtube.com/watch?v=7cIBU08rst0) Do note that iOS has some serious limitations still when it …
