xEM won't write to blocks 0, 1, or 2 but will write to 3

[Pilgrimsmaster]

@Pilgrimsmaster

Give me a bit, as i am tied up with something else at tbe moment

as you can see from my rushed reply and spelling mistakes…

Heres some good info to try.

CLONING - White Cloner How To ( Don't do it, but incase you already have! )

White Multi-Frequency Cloner: [white]

**PRE-AMBLE**

This WIKI is very similar to the <a href="https://forum.dangerousthings.com/t/cloning-blue-cloner-how-to/5138/2">Blue-Cloner Wiki</a> and all credit should go to <a class="mention" href="/u/tomharkness">@TomHarkness</a>; his <a href="https://forum.dangerousthings.com/t/xem-cloning-emulation-modes-and-the-perils-of-chinese-cloners/1547">xem-cloning-emulation-modes-and-the-pe…

White Cloner - Password found!

Hi All, Very quick post to get this out there. I’ve been working to figure out the password that gets set by the well known WHITE Chinese cloner when writing to tags. A friend has a locked xEM implanted so there was some real motivation to get this password for him. There is one known pass already on the proxmark forum but unfortunately it is only for some very old models. If you have an xEM that you have locked with the Cloner pictured and wish to be able to write to it with other devices. Y…

Handy Dandy Tips and Tricks Proxmark3

PROXMARK Remove Blue Cloner Password There are a couple of approaches to this, but for simplicity sake, I will post the one I THINK is the easiest Wipe the implant / fob / card back to T5577 using the password, something like this:- lf t5 wipe --p 51243648 Then write the new mode to it as per Proxmark instructions ( Found elsewhere ) Thanks @TomHarkness for the Blue Cloner Password

If these dont work, we can try to sniff your password.

But try those for now