I’m pretty torn on pulling my v1 out of my arm and replacing it with a v2
The v1 might be great but it’s just so weak for my planned use
But I worry the v2 still won’t be enough, or if it is… maybe it will be painful to use, as I’ve noticed the v1 as weak as it is will still pinch decently
@Eriequiet If you can wait some weeks i will give some more info how it is 
e
I have the V1 to compare the strenght
Where are you installing?
99% the Karate spot
Knife edge^
Still not sure where on the knife edge…
There is one rectangle marked where it could be okay. The spot is 46mm long so i can devide it by 3 xg3s xD
I marked it from 1 to 3
Any pros/cons at any oft the spots?
Its here!
To Do List:
Clean installation room
Let the Dust settle fore some Houres
Wait for Response from Michelle
Sterelize all the Tools i need
Prepare the Desk
Disinfect Hands etc
unpack all sterile stuff
LETS GO!
I’m really curious about the knife edge placement for this type of magnet, so I’m very happy that you are documenting this one, too. 
thanks @mrln !
Interesting how different the delivery speed of DHL Express is these days… since yours came via Leipzig… my sister’s Titan plus my own Titan also made it in approximately one hour from Leipzig to Cologne and only a few hours later it arrived at our hometown…
And then reading this…
I feel very sorry for you @Coma … 
Hope you will receive your Titan also very soon now…
One thing that came in my mind when I was reading this… since I’m a “Hobby Racer”, I remember a story that happened a little while ago…do you know the Nordschleife?
Maybe it’s that time again… 
Sorry again, I hope you will receive it in lightning speed now… Fingers crossed! 
(and hope the unicorn helps too!)
That’s what worried me - I am kinda used to the insane delivery speed I had all the other times, so I was sure something was “going wrong”…
Do you already know when / where (in your body) you two want to get yours installed? Already pretty curious 
Of course! Never managed to get there, but it sure is a legend
So okay, if my Titan is currently doing some laps there, I’d be fine with it 
Thanks a lot - and hey, unicorns always help!
Im not sure if i got the Right Xg3 - From the Packaging i cant tell the Difference.
I will wait for a Response from Michelle before implanting it -
Waiting for it is soooo hard - im ready to implant - just need the Info if they sent the New Xg3
No differences on the EAN
But they feel diffrent if i try to sense it with my Finger Implanted Xg3
The new one is clearly stronger, but that could be also other placement in the packaging or so.
Maybe only because it’s the same product+different version. I mean it’s on the same page when you order it, so I think it’s normal 
Better safe than sorry. 
but I believe they did it right.
Good sign! I hope you get the answer from Michelle real quick.
My sister is coming back from a special training for her job tomorrow, she scheduled her Titan install for this Saturday. Will be done by @Cybornidas . We both wanted to try a fingertip install (ring finger, left hand) not sure if it fits there for me (very skinny), but we’ll see how it goes. Maybe I get mine directly after her. So we might be the “Titan sisters” soon. anyways we try to get some good picture/video of it.
would be a good excuse…but definitely no new lap record after 1.5 weeks…
Do you know if the Xg3 V2 is differently packaged?
Is it possible to spot the Difference from the Outside?
It just looks like The Xg3 V1 and im not sure if i got the right one 
Likewise, there are few resources with knife edge installs documented
Can you get some magnetic viewing film that will show pretty quick the difference.
No, I would have to order some…
Got another magnet of any kind? If so see if it wants to stick to the side of the needle or the tip.
I have the xg3 in my Finger and another xg3 v1 still in pqckaging. I can feel a difference between the propably New one and the “old” one
But im not 100% sure about it
I will try taking a stronger magnet and feel the Polarisation
Edit:
Im able to Stick the Magnet with both poles on the “old” xg3 with some distance
On the new one i can just get one Pole to stick to the packaging
Xg3v1:
Propably xg3v2:
Its not possible to arrange them like on the v1
Can you 180° your magnets?
it should repel… 
Just be aware that the potential for creating microholes in the sterilization pouch paper by doing this is… elevated… basically anything you do that creates pressure on or manipulation of that thin porous paper can introduce contaminates. Of course, not likely that this is anything serious, just your friendly pedantic vendor of injectable products here to remind you about the safety concerns around such products 
