Now my question is, can I emulate this card with Proxmark 3 memory without a laptop, using battery power? If this is possible, then how to do it?
the proxmark3 easy does not have a battery or the extended flash mem to store this credential. so no.
you could modify the proxmark to add SPI flash & make a standalone for doing the emulation but it is currently not set up to do it.
you can use an android phone, OTG cable & the termux app (more info on the Proxmark Repo) to use your proxmark 3 easy portably
Correct, I just gave that as an alternative for you to consider.
As @Equipter said above would be the easiest way with a PM3
There are other Proxmark options that might be worth investigating.
A cheaper of those options would be a Proxmark3-X
It has Bluetooth and a battery.
You could achive the same as above with Termux but via Bluetooth, so nop cables and more discreet if that is what you are after…
I can’t confirm the following will work, But if you were to plug in a powerbank to the side port of the PM3 Easy, you would have power, and Standalone mode MIGHT allow ISO15963 emulation, or plug it into a laptop, start emulating, remove from laptop ( whilst still powered via a powerbank )
Just some more things for you to consider
Just some more things for you to consider
What should I pay attention to?
Friends, I thank you for your answers! Thank you and low regards!
I don’t want to be intrusive. But the question arose by itself))
Are there magic ISO 15693 cards that change the UID to 66 blocks of 2235 bytes? To make a clone of my card.
[usb] pm3 → hf 15 info
[=] Using scan mode
[=] — Tag Information ---------------------------
[+] UID… E0 16 3C 66 13 2C 6B FF
[+] TYPE… EM-Marin SA (Skidata); EM4237 [IC id = 15] 23,5pF
[+] SYSINFO… 00 0F FF 6B 2C 13 66 3C 16 E0 02 00 41 03 0F
[+] DSFID… 0x02
[+] AFI… 0x00
[+] IC ref… 0x0F
[+] Tag memory layout (vendor dependent)
[+] 4 ( or 3 ) bytes/blocks x 66 blocks
[+] 264 total bytes
If such exist, where can I buy it?
Probably, lost in translation
What I meant was, you have other options.
examples that I gave you
It is 56 blocks. I need 66 blocks. That is the problem. I can’t find these((
What is the difference between proxmark3 x and proxmark3 easy at the software level? Both are flashed and run with iceman firmware?
The 66 Block might be around, but one I linked is the only one I have seen personally.
Nothing I believe
But the Hardware has a built in battery and Bluetooth connectivity so more functionality.
The Proxmark3x is a much cheaper option than the PM3RDV4 with the same functionality
we should wait until we know the actual chipset in use before looking at magic cards. if yours isn’t a SLIX, using a magic card won’t be of any use to you anyway. it’s likely your iso15 card is one that does not have a direct magic counterpart but that doesn’t mean you are unable to make a copy.
could you describe more about the system you use it with, post pictures of the readers you use the card with & what the function of the card is.
2 Likes
Understood thanks!
Today I tried to emulate the card with pokhmarkom3 from a laptop, it didn’t work.
[usb] pm3 → hf 15 sim -u E0163C66132C68FF
[=] Press pm3 button to abort simulation
[=] You can cancel this operation by pressing the pm3 button
[#] button pressed
[=] Done!
Why doesn’t the device work on Proxmark3?
These are ski date cards. Used in the parking lot. The reader is from a ski date company, just like in many places.
Just a minute
[=] Downloading 2235 bytes from emulator memory…
[=] — Tag Information --------------
[+] UID… E0 16 3C 66 13 2C 6B FF
[+] TYPE… EM-Marin SA (Skidata); EM4237 [IC id = 15] 23,5pF
[+] DSFID… 0x02
[+] AFI… 0x00
[+] IC ref… 0x0F
[+] Tag memory layout (vendor dependent)
[+] 4 bytes / blocks x 66 blocks
[+] 264 total bytes
[=] — Tag Memory -------------------
[=] -----±------------±–±-----
[=] blk | data |lck| ascii
[=] -----±------------±–±-----
[=] 0 | 92 08 D3 1E | 0 | …
[=] 1 | 82 18 60 20 | 0 | …`
[=] 2 | 00 38 00 00 | 0 | .8…
[=] 3 | 18 48 41 00 | 0 | .HA.
[=] 4 | 17 00 00 00 | 0 | …
[=] 5 | 00 00 00 00 | 0 | …
[=] 6 | 00 00 00 00 | 0 | …
[=] 7 | 00 00 00 00 | 0 | …
[=] 8 | 00 00 00 00 | 0 | …
[=] 9 | 00 00 00 00 | 0 | …
[=] 10 | 00 00 00 00 | 0 | …
[=] 11 | 00 00 00 00 | 0 | …
[=] 12 | 00 00 00 00 | 0 | …
[=] 13 | 00 00 00 00 | 0 | …
[=] 14 | 00 00 00 00 | 0 | …
[=] 15 | 00 00 00 00 | 0 | …
[=] 16 | 00 00 00 00 | 0 | …
[=] 17 | 00 00 00 00 | 0 | …
[=] 18 | 00 00 00 00 | 0 | …
[=] 19 | 00 00 00 00 | 0 | …
[=] 20 | 00 00 00 00 | 0 | …
[=] 21 | 00 00 00 00 | 0 | …
[=] 22 | 00 00 00 00 | 0 | …
[=] 23 | 00 00 00 00 | 0 | …
[=] 24 | 37 80 53 42 | 0 | 7.SB
[=] 25 | 2C 90 53 42 | 0 | ,.SB
[=] 26 | 21 A0 53 42 | 0 | !.SB
[=] 27 | 41 00 00 00 | 0 | A…
[=] 28 | 00 00 00 00 | 0 | …
[=] 29 | 00 00 00 00 | 0 | …
[=] 30 | 00 00 00 00 | 0 | …
[=] 31 | 00 00 00 00 | 0 | …
[=] 32 | 00 00 00 00 | 0 | …
[=] 33 | 00 00 00 00 | 0 | …
[=] 34 | 00 00 00 00 | 0 | …
[=] 35 | 00 00 00 00 | 0 | …
[=] 36 | 00 00 00 00 | 0 | …
[=] 37 | 00 00 00 00 | 0 | …
[=] 38 | 00 00 00 00 | 0 | …
[=] 39 | 00 00 00 00 | 0 | …
[=] 40 | 37 80 53 42 | 0 | 7.SB
[=] 41 | 2C 90 53 42 | 0 | ,.SB
[=] 42 | 41 00 00 00 | 0 | A…
[=] 43 | 00 00 00 00 | 0 | …
[=] 44 | 00 00 00 00 | 0 | …
[=] 45 | 00 00 00 00 | 0 | …
[=] 46 | 00 00 00 00 | 0 | …
[=] 47 | 00 00 00 00 | 0 | …
[=] 48 | 00 00 00 00 | 0 | …
[=] 49 | 00 00 00 00 | 0 | …
[=] 50 | 00 00 00 00 | 0 | …
[=] 51 | 00 00 00 00 | 0 | …
[=] 52 | 00 00 00 00 | 0 | …
[=] 53 | 00 00 00 00 | 0 | …
[=] 54 | 00 00 00 00 | 0 | …
[=] 55 | 02 00 9F 16 | 0 | …
[=] 56 | 00 06 28 00 | 0 | …(.
[=] 57 | F0 7D E4 E6 | 0 | .}…
[=] 58 | 8A 7A 90 04 | 0 | .z…
[=] 59 | 30 54 EF 7B | 0 | 0T.{
[=] 60 | 13 EF AC 83 | 0 | …
[=] 61 | 00 00 84 7C | 0 | …|
[=] 62 | B1 65 16 89 | 0 | .e…
[=] 63 | D1 D3 15 98 | 0 | …
[=] 64 | C3 5E 0F EE | 0 | .^…
[=] 65 | 00 00 00 00 | 0 | …
[=] -----±------------±–±-----
I don’t have access to the card right now. One of these days I’ll take a card, try to count it on my iPhone and post it.
1 Like