Just recieved the Unifi access kit, and can confirm that both the “UA-Pro” and the “UA-lite” reader has no trouble reading both the FlexM1, XM1 and the NeXT.
[One can also utilize the access hub with two UA-lite readers even though the picture states 'one port for UA lite and one port for UA Pro, for those interested]
Hello all,
really Great spreadsheet!
I bought the ID-20LA because of it. Great product, very good read range (about 2 cm with a NExT implant) but kinda pricey, was about 40 euro’s.
As I am hoping to one day throw away my keys, i want to buy alot of them which will get costly.
So in my search of cheap readers i found the following from banggood:
quick review of the RDM6300: REALLY cheap, i got 5 of them for 15 euro’s 
at first read range was really limited, barely got any reads. not really usable in my opinion
(as my chip is installed deeper than intended 
)
But after I unrolled the antenna coil about 4 turns, read range increased significantly up to a point of about 4mm distance to the skin.
Personally for me still unusable since i plan to “hide” the readers. so will need the range from the ID-20LA.
But maybe for others who don’t have that constraint…
Next up is the ID-3LA (price around 13 euro + shipping from ebay: https://www.ebay.com/itm/ID-3LA-RFID-Reader-Module-125kHz-EM4001/184440582357 )
with external antenna, which needs to have inductance of 1.337 mH. So will have to try my luck with coil winding ^^
Great info, thanks, I will update the sheet and look forward to your next review 
He comprado el m-lock motorcycle key pero no consigo hacerlo funcionar con el NExT, solo funciona con la versión vieja, igual que ha sucedido con la cerradura Samsung que solo funcionan con viejas versiones. lo comento para que no le pase a nadie más el mismo problema, actualiza el excel para que no de confusion a error.
Gracias
The COMMAX CDL-100WL is Green for the NeXT but doesn’t have a Yes. Does the Next work with this lock?
Normally there should be a link to the product and then a note with another link to forum where it has been tested and confirmed.
Let me know if you can’t find it or it’s not there
@Pilgrimsmaster what sort of proof/evidence do I need to provide to propose a change to the matrix?
In my experience, the Gallagher T10 readers are not compatible with xM1 tags. We have them at my uni and despite everything I tried (Including the help of people on the discord) I was only ever able to get a read on one particular reader (out of about 16). I believe this is due to manufacturing variability in the position of the coil inside the reader.
I’ve recently gotten a FlexM1 installed (still have to post the install video for that), and this has never failed to give me a successful read.
I wonder if an annotation could be added to the matrix to say that the T10 is “compatible” with x-series implants but only in specific instances?
Yeah mate no worries, can you do me a favour first and use the diagnostic card on it ( if you havent already ) Gallagher are often dualfrequency.
This still wont be definative though, because I have scanned them myself and The HF and LF leds light up, but I KNOW it is only actually reading LF.
Do you have access to the admin people?
Is that something you can ask them? ( If they even know )
Have you scanned the Gallagher card with TagInfo etc. to check the HF card credentials?
The ones I have access to are only using HF, I’ve scanned them with the diagnostic card and the xFD indicators.
The student card is a Mifare classic 4k but only the first 16 sectors have any data on them, I’ve successfully cloned it to other magic 1k cards, and both an x-series and flex implant. I know the x-series was working because my university also uses Salto XS4 readers on some doors and the xM1 works great with those.
Things I’ve tried (and failed) on the Gallagher T10:
I did manage to get a read on the T15’s that are scattered around campus, but the T10’s and the one singular T12 had no luck.
Here’s some videos I took for discord of my attempts:
Of course, the other (more simple) explanation is that I poo-brained the whole operation and missed some obvious detail…
Nah mate, I think you are on the money.
I am going to do some work on the matrix shortly, and I will update it.
Thanks for the info
I am just working on some 'puter problems.
Anyone able to confirm if the Schlage S-480 works with any implant? It’s blank at the moment.
We got new fire doors put into all the apartments here and there are two locks. One of them is a secondary lock, which I was able to swap for my old eurocylinder HF lock, and one is a night latch which seems could be swapped out nice and easy with the Schlage.
Cheers, I’ll add that shortly…Any hardware other than payment terminals that I can YES ?
I’ll add purewrist / custom payment also
Infact, It might be better to make a Payment section and add the payment terminals, with links to the forum to the specific terminal and how to present them
Or I cad add a new Sheet…
Yes: ACR122U
No: Uhlmann & Zacher CX2172, Becode AIR+, Yale Doorman V2N, any LF stuff 
Awesome, thanks I’ll add 'em now
I decided on a Payment Sheet, I can move back to the main sheet, but i think it is better/easier having a dedicated place. But I will still add Walletmor / custom payment in the main sheet…
I have made a start on the layout ( Replicated the mainsheet ) I just need to collate the posts with readers etc
Anyway, heres the link, to the new sheet
Very groovy!
But a bit of a misnomer: it’s not so much a “chip compatibility” matrix than an “payment terminal easy of use” one: the chip should be compatible with all of them, but more or less easy to hit.
Also, it will be harder for people to supply photos / specs as it’s not easy to ask details from cashiers while purchasing something. I know because I try and I can’t unless I know the merchant and they’re not busy with other customers (and they’ll indulge my shenanigans).
Yeah, we will just do what we can, alternatively the make and model are generally written on them and “google” images should have the photos we want. and a bit of “photoshop” for antenna location and best presentation should be enough
Thanks Rosco, that’s exactly what I was hoping for, you saved me from trawlling…
Likewise, I have been conscious of us doing it, i’m going to move these posts shortly…
It’s not a complete derail, as he does intend to use a Walletmor for his home access project
I have tried several Verifone H5000 and have to say, they dont work.
The reader is behind the display, but the reception seems too weak. Its also uncomfortable to try it, because the display is a little lowered and there isnt enough space to move your arm/hand.
Walletmor + Verifone H5000 = NO
edit:
The next reader works with the Walletmor.
Lane 5000 = YES
