Chipping myself for college - Cloning HID card to xEM with Proxmark3 RDV4

[Pilgrimsmaster]

@skynet

I need to learn how to copy the HID

@skynet

it’s a hf mifare classic. iso14443-A

Ah, see my confusion…

@skynet

if it was a LF then I would have just used my 125kHz EM / HID / AWID Cloner.

Well, the HID function won’t work when the HID is HID iClass.

Also, if you have a PM3 Easy, I would reccomend you using that over the Blue Cloner, (the blue Cloner is still good for what it is), but if you are still going to use the blue cloner, make yourself familiar with the password removal commands.

Also when you start using it on actual implants, you might want to consider Roscos great Blue Cloner Mod

The "hot wire" blue cloner mod

In the interest of minimizing the risk of tearing when programming a T5577 with my blue cloner, and to avoid opening the enclosure each and every time I want to use it to expose the coil, I modified it to put half of the coil on the outside and edgewise, to make it easy to “slash across” the implant orthogonally and as close as possible. Check it out: My blue cloner sort of looks like a hot wire cutter now, hence the title of this thread. I took a few pictures of the construction if anybody…