Cloning HID to T55x7

I have a LF HID Proxy fob that I have been able to clone successfully onto stickers and cards using the lf hid clone -r XX... command. I recently purchased a bunch of T55x7 blue tags and I’m having issues with cloning the same tag onto them. Both reading and searching after writing the data to the tag fails. Only way to get any sort of response from it would be to lf t5 wipe and then lf em 410x clone --id 0F0368568B to revert it back to the original state.

Am I doing something wrong?

My original tag:

[usb] pm3 --> lf hid reader
[+] [H10301  ] HID H10301 26-bit                FC: XX  CN: XXXXX  parity ( ok )
[+] [ind26   ] Indala 26-bit                    FC: XXXX  CN: XXXX  parity ( ok )
[=] found 2 matching formats
[+] DemodBuffer:
[+] XXXXXXXXXXXXXXXXXXX

[=] raw: 00000000000000XXXXXXXXXX

The blank
When running lf search on an brand new tag

[usb] pm3 --> lf search
[=] NOTE: some demods output possible binary
[=] if it finds something that looks like a tag
[=] False Positives ARE possible
[=]
[=] Checking for known tags...
[=]
[+] EM 410x ID 0F0368568B
[+] EM410x ( RF/64 )
[=] -------- Possible de-scramble patterns ---------
[+] Unique TAG ID      : F0C0166AD1
[=] HoneyWell IdentKey
[+]     DEZ 8          : 06837899
[+]     DEZ 10         : 0057169547
[+]     DEZ 5.5        : 00872.22155
[+]     DEZ 3.5A       : 015.22155
[+]     DEZ 3.5B       : 003.22155
[+]     DEZ 3.5C       : 104.22155
[+]     DEZ 14/IK2     : 00064481678987
[+]     DEZ 15/IK3     : 001034014845649
[+]     DEZ 20/ZK      : 15001200010606101301
[=]
[+] Other              : 22155_104_06837899
[+] Pattern Paxton     : 259822731 [0xF7C948B]
[+] Pattern 1          : 9750181 [0x94C6A5]
[+] Pattern Sebury     : 22155 104 6837899  [0x568B 0x68 0x68568B]
[=] ------------------------------------------------

[+] Valid EM410x ID found!

After running lf t5 wipe

[usb] pm3 --> lf t5 detect
[=]  Chip type......... T55x7
[=]  Modulation........ ASK
[=]  Bit rate.......... 5 - RF/64
[=]  Inverted.......... No
[=]  Offset............ 33
[=]  Seq. terminator... Yes
[=]  Block0............ 00148040 (auto detect)
[=]  Downlink mode..... default/fixed bit length
[=]  Password set...... No

that lf t55 detect is wrong if you truly did t55 wipe before. the block 0 is not what the wiped block 0 looks like