Cloning mifare 4k to ultimate magic

AGMB · August 5, 2024, 5:11am

Hi there, I am trying to clone a MIFARE 4k card into an Ultimate Magic from Lab401 with the proxmark3 RDV4. Firmware updated today.

could someone give me an idea of the commands to do so?

I think I have succesfully read the card with hf search and hf autopwn.

My problem is that I have never used a magic card

Below the screenshot for the hf search for the Ultimate Magic

Any help would be much appreciated

Aoxhwjfoavdlhsvfpzha · August 5, 2024, 5:23am

If you haven’t seen it yet, you’ll want to check out:

github.com

RfidResearchGroup/proxmark3/blob/master/doc/magic_cards_notes.md#umc

<a id="top"></a>

# Notes on Magic Cards, aka UID changeable

This document is based mostly on information posted on http://www.proxmark.org/forum/viewtopic.php?pid=35372#p35372

Useful docs:

* [AN10833 MIFARE Type Identification Procedure](https://www.nxp.com/docs/en/application-note/AN10833.pdf)

# Table of Contents

* [Low frequency](#low-frequency)
  * [T55xx](#t55xx)
  * [EM4x05](#em4x05)
  * [ID82xx series](#id82xx-series)
    * [ID8265](#id8265)
    * [ID8211](#id8211)
    * [ID-F8268](#id-f8268)
  * [H series](#h-series)

This file has been truncated. show original

Someone should be along soon to offer you more specific help