Hello everyone, I have the Dual-Implantat NeXT V2 with LED I wanted to ask if this works for you? I have a Samsung Galaxy Z Folder 5 and the NFC Tool Pro app and I can’t describe my implant. There is always a message that this species is not supported. Does my phone find the wrong chip or is the implant defective? I would be very happy about your help.
1 Like
How long ago did you have it installed?
Generally it takes 2+ weeks to get reliable reads.
Do you know where the NFC antenna is on your phone?
Do you know how to present your implant to your phone?
1 Like
I have had the implant for 2 weeks, and it is already my 2nd implant. the first one everything works with my phone.
With that and the fact your other one works, I would suggest you are still healing; give it a little more time before getting concerned.
Do you have anymore reader other than your phone?
2 Likes
Are you talking about writing NDEF?
It appears your phone can see it, so you SHOULD be able to write to it.
It might be better to let it heal a bit longer before you try to write though
1 Like
Okay, I’m still waiting, but could it be that the implant is defective and I would have to replace it?
That is highly unlikely
It looks like you are getting a read correct?
It is slightly easier to read than it is to write, and your healing time is right on the edge of what is typical, so with a bit more time, I think you will be ready to write to it.
In the mean time, I would recommend you get yourself an RSP or MFGC, they really do help
2 Likes
Use tagwriter and try
2 Likes
Yes, I tried l too, but it didn’t work either.
Are you on iPhone or Android?
Android
Can you do a full scan with taginfo?
2 Likes
Yes
1 Like
Can you post the full scan data?
1 Like
The data i want is unreadable. Can you post the xml or txt files via the share icon in taginfo?
1 Like
ok nevermind i was able to extract the data. it looks intact / correct.
if you scan your chip with no apps open (just the main screen) does it open the browser and show the dngr.us/scan-nextv2 url?
1 Like
Nothing happened
Ok let’s try RawNFC to send raw commands to the chip to reset a blank ndef record.
Input these commands (just copy paste the whole block);
A204E1100600
A2050303D000
A20600FE0000
A20700000000
A20800000000
A20900000000
It should now look like this;
Tap your next v2.
You should get a series of acknowledgements. Post the screenshot.
After this is successful you should be able to write with NFC tools or tagwriter.
3 Likes