Awesome! Good luck fellow cyborg!
With Lenovo’s great ADP (accidental damage protection) plan, if you mess up, they will probably replace it lol.
Update. I cut a hole in my carbon fiber case. Metal shards everywhere. Do not recommend. So back to the drawing board and waiting on new parts. I have a better idea. Stay tuned.
NFC card works but not my xSIID.
So is you laptop housing carbon Fibre or metal with carbon Fibre sticker?
It looks like you had some decent space to work with, even so, did you consider removing the pcb from the the KBR1 and then just making a small hole, the size of the antenna (which is much smaller than the full enclosure) ?
It’s carbon fiber. With a carbon fiber sticker. 🥲
I did cut a hole the size of the antenna. The antenna is the size of a credit card.
My new plan is to drill a small hole big enough for the wires to pole through in the bottom cover which is also carbon fiber. And put the antenna on the outside and overlay a new “carbon fiber” sticker over the antenna.
Carbon fiber is conductive and will affect the antenna even if it’s placed on the outside. You might be able to mitigate this by placing a ferrite sheet between it and the case.
Once my new laptop parts show up I’m gonna try again. My main thing will be to get the module fitted in the laptop and the wires poking out for antenna. I’m moving it to the other side of my laptop too. Will post some updates once I get the new parts!
*looks at the pictures again
What!? Why!? I don’t understand Lenovo. (Or chinise companies for that matter) Carbon fiber looks awesome on it’s own, and in my opinion, it looks better than the sticker.
Haha the carbon fiber was just black. Check out the X1 carbon laptops.
I wanted the carbon fiber sticker because I like the pattern. Also my son helped me pick it out.
Here’s a V6 without the sticker
Here’s a v9 with no sticker but the Lenovo carbon fiber pattern
But my beautiful V7 is the best which is the one I modded.
Edit: I just realized I have too many laptops … 8 within arms reach…
I mean… if your going to go to this much trouble
Buy a wave ID nano, and stick IT inside, or just leave it plugged in… it’s low enough profile it lives on my laptop… also a better scan angle
My next step was to wrap my own antenna and build a small circuit with an attiny and an NXP chip to emulate hid and write the ID from the scan but in a way smaller package.
Tha ks for the lead on the wave. Ordering now.
Triple check to make sure you get the right one, there are a lot of options…. There’s a thread I posted my experience buying the wrong one
Wow this wave id look expensive and hard to find… Saw some on a few sketchy looking sites for $50 but everywhere else is $200!
Kernel USB quirks. When it’s plugged into my laptop it works in bios and for LUKS password but not after booting into the full OS. It stops inputting.
I’ll figure something out even if I gotta fab my own.
In fact, I posted a link to that thread in another thread not that long ago…
Good vs cheap
In context, your cutting apart a laptop that probably costs at least 600$
I believe I bought mine through Newegg
Haha I like it. Tell it how it is! You ain’t wrong. 🤷
And laptop was about $3k 🥲
I’ll check Newegg. Thanks!
pretty sure it is much smaller than that
here is a use for the other 2, a couple of neat little desktop reader mounts