Flipper Zero - Kickstarter RFID/RF/BLE/USB/IR

Lounge
475

breakdown of the 3 most popular firmware and their sources:

  • official flip firmware:
  1. has regional limitations on subghx tx and Rx to comply with laws
  2. can only r/w/e Em41x em42xx hidproxII 26bit(h10301) and indala raw for hf
  3. for hf can only emulate MFC uids and 0 hf writing, can emulate mful tho
  4. link to fw
  • muddledbox firmware:
  1. exact same as the above firmware except it removes the sughz restrictions and lets you abuse the full extent of the subghz hardware
  2. link to fw
  • unleashed fw:
  1. same as muddled but adds a sughz jammer and potential rolljammer (BEWARE. HAVING A JAMMER IS VERY MUCH ILLEGAL)
  2. link to fw

info on the rfid/nfc aspects of all fws
all firmwares are the same in the nfc/rfid aspect so none of them are more favourable than the other for this task

low Frequency

  1. em410x and em42xxx - read, write emulate (t5577 and em4305)
  2. HID proxII 26 bit - read, write emulate (t5577 and em4305) (every other HIDPROX doesn’t work yet. including 37bit)
  3. indala raw - read write emulate (t5577 and em4305)

high frequency

  1. Mifare classic 1-4k - read, emulate UID, no writing and no full DS emulate (may not be able to crack card if the keys are not in their dictionary)
  2. Mifare ultralight - read and full emul, no writing tho
  3. EMV - read, that’s it
  4. MFDES - read and emuid is coming at some point, no emulation no writing and (obviously) no cracking

@Eriequiet here ya go

EDIT: me and ~~4/5 others from the flip community have started a public knowledgebase to help people understand the tech they’re using on the flipper so if you know stuff about ANY of the flippers abilities (current and future) please feel free to push knowledge
https://github.com/equipter/flipper-knowledgebase

6 Likes