I thought it might be Handy Dandy to have a place for all of those visual and tactile persons, that want to be able to see and feel what an intended implant physical size is, and to work out placement on their own bodies
I would ask that people don’t ask questions in this thread
Just read or post your CAD files and move on…
accompanying related threads of interested
During a discussion
on another thread in this forum, it became clear that a naming convention of some sort should be made for the implant locations in the hand. I simply modeled the way dentists talk about teeth in the mouth, and concluded the following should suffice.
Multiple chips in one hand
Before I get into possible implant locations, I want to first address the idea of implanting multiple chips in the same hand or in close proximity. There a few primary considerations;
Keep at least …
In short This post as all about location, location, location!
While planning my current batch of implants it became apparent there is LOTS of great information on this forum about implant locations but the number of threads and opinions is a tad overwhelming. This is especially for newbies and results in multiple “Implant location plan” thread’s.
With this in mind I have tried to recall all the implant locations I have seen discussed or showcased on this forum to list them and any …
Credit goes to
@raphael Great Idea and design
Fusion 360 version
dt_implant_kit.stl.zip (176.8 KB)
xG3 V1 and V2 are 3x15mm and a close approximation to the xM1 and xDF2 which are slightly shorter @ 3x13mm
xEM / xNT space model could be used for the xSLX xHT and xBT also
dt_implant_kit.f3d.zip (766.6 KB)
xG3 v1 xG3 v2 ( 3x15mm )
xG3 v1 xG3 v2.STL (112.8 KB)
FlexMN , FlexMT ( 0.4mm thin biopolymer, 33mm total diameter)
FlexMN FlexMT.STL (78.4 KB)
VIVOKEY ring by LANDSQUID - Thingiverse for the original file and to tip creator
DTring_v2.stl (786.8 KB)
holder.stl (601.3 KB)
The forum won’t allow .ipt file, but it is contained within this zip file ( along with the .stl )
url/qfODIUoP98AzjAwbIVBUBnID42n.stl) (701.6 KB)
http://levi.pink/kbr1.step (might try to open as plain text, just to ctrl+S to save it.
FlexM1, Disney Conversion ([Flex Tapered 8mm-7mm x 38mm x 4mm)
Flex Tapered 8mm-7mm x 38mm.STL (7.7 KB)