Help, MIFARE GEN2 1K kEY

[Pilgrimsmaster]

@amal

I would highly suggest pulling down the most recent source, compiling it, and flashing your proxmark3.

Here you go

@Pilgrimsmaster

Future Updates

( Thanks to @TheCyborgFirefighter and @Zwack ORIGINAL POST )

• cd proxmark3
• git pull
• make clean && make all OR make -j (it will allow for parallel compiling and goes faster. - Thanks @ Iceman) OR make -j4 (for compiling in parallel on all cores - Thanks @ equipter)
• ./pm3-flash-bootrom
• ./pm3-flash-fullimage
• pm3
• hw tune