HID corporate 1000 to NTAG213 ring

Support
1

I am new to rfids & Proxmark3 .

So i want clone my HID corporate 1000 access card in to ring I have which shows up as NXP-NTAG213 on NFC tools, is that possible??

I was easily able clone HID corporate 1000 access card to a T5577 card using proxmark3. But wanted to do it for the ring

Any input will be appreciated.

2

The NTAG213 is not compatible with any HID credentials that I’m aware of, and in particular certainly won’t work for cloning an LF tag

You could however use something like the Magic Ring V2, which has a T5577 in it

2 Likes
3

there are some situations where you can take an LF HID credential and encode the pacs as a 14a(ntag is 14a) UID, this relies on a BUNCH of very very unlikely factors and system configuration choices that would make no sense to enable in this situation.
(would need multiclass readers, would need HF 14a UID enabled and would need a long enough UID space to accept 56 bits, containing 48bit pacs without detecting the fact the uid is longer than the pacs [they can do this])

if the stars were aligned in just the right way and your system had all of the right parameters to allow this to work, you don’t have UID changeable NTAG ring.

so you’re super totally out of luck on that one, unfortunately. Aox makes a great point about the Magic Ring v2.

the Magic Ring v2 has a mifare classic and a t5577, i assume you’re using your ntag213 ring for NDEF (sharing links etc) as that’s basically all ntags are used for, mifare classic can also do this if you have(or have access to) an android phone to encode it, once its encoded both androids and IOS can pick up the stored link

1 Like