I’m currently locked out of my nfc chip in my hand it is encrypted and i have no idea how to decrypt it. Any advice would be greatly appreciated.
Hi, welcome to the community!,
As a fairly new member myself I don’t have the appropriate amount of experience to help you as much as I’d like. Others will chime in shortly to further assist you.
Meanwhile, may I ask which chip you have and what reader your using?
1 Like
Thank you for your response by the way.
I’m a noob myself, so I may be wrong…
xNTs cant be encrypted. The data on it can.
There might be a chance that you locked it, which means you can’t write, is it that?
Anyway, can you send the output what the App TagInfo says? (Maybe censor the id of the xNT)
1 Like
The first order of business is to get some information. I suggest scanning with TagInfo and sharing screenshots… be sure to block out your chip ID if you care about such things before posting.
That will tell me if your chip is actually locked or something else is going on.
My apologies it is this one https://dangerousthings.com/product/xm1/ which can be encrypted
Ah ok so it is a Magic Mifare 1k… the sectors can be “locked” by accident, but since it is a magic mifare with backdoor command, you can still wipe it back to normal using the proxmark3 … as long as it has appropriate firmware of course that supports good clean wiping of magic mifare 1k gen1a chips like the xM1.
What firmware is on your KK moon proxmark3?
1 Like
I have a proxmark rdv4 and the lf antenna bought from yourself.
I simply open the proxmark folder run.me and the wipe doesn’t work
Why is this?
After run.me
Could you share the commands you are using?
ALSO
1 Like
this is the commands I’ve been listed. I don’t know if I have to flash firmware even with using proxmark trio. If so please advise. thank you
Okie Dokie, But First, can you download this
and then do this
Thank you kindly will look further into!
Lets all be on the same page, The magic 1k is HF, not LF.
1 Like
Yes I’ve used my rdv4 on hf mode with the Bluetooth module with accurate reading.
I can’t seem to get the rdv4 online with my computer.
It says offline failed every time I am close to getting a reading then it freezes.
Uart command will not pull through with Bluetooth module.
I’ve tried flashing module but no luck.
Am curious if my programming inadequacy is the fault or am I generally up shit creek here?
Thank you.
IIRC, Blueshark support is broken on master (the latest firmware), so that might be your issue. Try disabling the bluetooth support and reflashing, and then connecting directly via USB
OK so com 3 is incorrect, can you check in device manager to find out ehat com port your rdv4 is on.
Type device manager into the search bar on the start menu.
Look for serial ports.
Device manager says com3 and I flashed it to com3.
What am I missing man?
Hmm that’s strange because the software is basically saying the device aint there. Have you tried a different USB cable and port?