If you arent a member of DT Club, remember you miss out on the fun announcements first that get posted there.
New Product Release
After delay after delay and untimely holdup, I would like to announce MWG has a new accessory for your Proxmark3 Easy and Proxmark3x.
Field Enhancers!
They come in 2 options and each option has 2 silkscreens.
Option 1: Midboard Replacement
This is a rather direct replacement of the PM3 Midboard. The front silkscreen has the Midwest Gadgets Logo (Which will be covered by the LF antenna) and a plain looking HF Zone. The backside has Instructions for presenting your implant (which will be covered by the LF antenna) and outlines of the implants and the reccomended placement on the PM3 for best coupling.
The midboard replacement comes with the Midboard, and 4 spacers. The nylon spacers can be attached above or below the midboard, it is your prefference.
Option 2: Back-Plane Add-on
The backplane can be added directly to the back of the PM3 Easy and allows for full use of the HF field for proper coupling of implants or resting cards on. It will include 4 brass standoffs for attachment and the Back-plane.
The Back-Plane board is perfect for those that have the PM3X where the midboard is populated with components for bluetooth and standalone reads.
Build-Guides and instructions are available Here
The site is now live with the Field Enhancers so please feel free to let me know your opinions of them. Remember this is a V1 product so they will likely evolve as i have time to evolve them.
Note
There are variants of the Proxmark 3 Easy that are NOT compatible with the field enhancers. The best way to identify incompatible devices is by looking at the midboard itself.
If the “Power” label is Above the right screw post, these boards will not work, neither will a back-plane board. The screw holes just do not match up.
I was attempting to be sneaky with this release, @Pilgrimsmaster was going to do a full review and we were going to release in tandem, however Customs held up the units for a week, and then when Pilgrim received his board we found out that he has one of the Variant Proxmark3’s that this will not work on. HOWEVER. if you purchased your Proxmark 3 Easy from Dangerous Things then you have nothing to worry about. Both units will work on your device just fine.
Anyways as always, i thank the community for allowing me to put out products like this, big thanks to Tac0s for some design pointers in the silkscreening as well as the images for the Implant styles. Massive thankyou to @amal for allowing me to borrow a Proxmark3 so i can ensure the midboard would work. This originally was just going to be a Backplane because my PM3x has a completely populated midboard.
Anyways, dont forget to use the special coupon code!