Thanks for the super quick reply
I should have stated to start with, I have already programmed the chip in HID mode, and added a card to it thats Already in my access control software…
My issue im having is i cant seem to find a place ANYWHERE on the reader that it will and read… i Too have the KEYPADLESS ones as well, I wil try it there, but the primary ones on my house are keypad ones 
The keypad does not impact the location of the antenna coil. The usual suggestion is to start with the mid lines and the diagonals on antennas. You could try a low frequency field detector on the pad first to see where you get good signals. I don’t have any implants so I can’t give much advice there.
Tell me more 
Are you getting a read and a failure or no read?
When was the chip implanted? Are you getting good reads from it?
I bought a Hornady Rapid Safe Night Guard…
Has little key fobs, a Watch band fob, they are 410x chipset
I was able to program one of my NExT implants to be used for it, WORKS awesome, just getting used to perfect placement…
otherwise works like a charm
Hey
So, I am getting NO READ, no beep
Nothing
The chip was implanted Last sunday,
and yes if i use the Proxmark3 i get perfect reads eveytime,