Placement of multiple implants

[Pilgrimsmaster]

@filefly

I’m absolutely sure there are topics already posted about this

Here’s one

Proximity of implants to each other

I have been looking at implants for sometime and the time is approaching for a few large needle jabs. I already have implanted magnets and few piercings and tattoos, so I’m not concerned about the implant process. I know that different frequency chips can be put close to each other, but of the same frequency must be separated. where the reader can only read one at a time. I know flexMN can’t have anything within 5+cm (2") What about the range of smaller flex e.g. flexDF? Slightly larger flex…

@filefly

they’d end up being ~10mm apart?

From my experience, this is not an issue

@amal

You would just need to be very specific about how you presented your hand for specific readers.

This OR the placement.
Mine are in L0 and L1

Here’s an explanation

@Pilgrimsmaster

With regards to you main question, ~“how close can I put implants of the same frequency” thats a tough one to answer

It really comes down to the Reader(s), i.e. Higher power readers are going to be more difficult to target a read from a specific implant.
Some readers may only “look” for specific chip types, so something else in the field, it may ignore

BUT you can also use physics and Biology in your favour

For example a NExT in you #P0 and FlexM1 in you #P01, when you tuck your thumb under your palm, these implants are at right angles from each other, so you can choose how to approach the reader