PM3 Easy install issues Mac - Sonoma

[Pilgrimsmaster]

Let’s try this for starters

@amal

• hold the button down on your proxmark3 and keep it held down
• plug it in to USB port
• while still holding the button, confirm the PM3 is visible in device manager. it may have a different com port but that’s ok… take note of the COM port number.
• in proxspace env, at ~/proxmark3 prompt, run pm3-flash-all
• wait until it’s finished updating
• release button, wait 5 seconds
• unplug from USB, wait 5 seconds
• plug in to USB (no button)
• run pm3 to start client