(***) Relay module access controller 13.56MHz IC card

Mobile phone NFC induction control board fingerprint identification relay module IC card 13.56 mhz access controller

image

INTRODUCTION

Features:

  1. Compatible with DC12V-24V voltage range;

  2. Three verification methods: fingerprint, IC card, mobile phone NFC, I chose to not have the fingerprint module, I had no need for it, It’ll save you about $10

  3. Three control modes can be switched: jog mode, self-locking mode, ignition mode;

Three control modes:

**Inching mode:**turn on after fingerprint recognition; automatically turn off after releasing the finger and reaching the set delay time.

**Self-locking mode:**turn on after recognizing the fingerprint; after releasing the finger, it will be disconnected immediately after re-identifying the fingerprint.

**Ignition mode:**keep the fingerprint recognition unreleased; it will keep on all the time, and it will disconnect immediately after releasing the finger

  1. In the jog mode, the output time can be adjusted, and the output can be up to 15 minutes;

  2. With relay normally open and normally closed output control.

  3. can be connected to the exit button

** INSTRUCTIONS **

You'll need to rotate 90 degrees to read more easily


TESTING INCLUDING READ RANGES

COMPATIABLE WITH / Tested with
IC card/NFC sensing distance: ≥25mm
The blue Key fobs it comes with ≥20mm
FlexM1 ≥10mm
FlexNT ≥12mm
Apex Flex :x:
Spark 1 :x:
xMagic ≥0mm
NExT :x:

TEARDOWN
Not a tear down, but a de-casing

PROs
• Small from factor ( but tall with Relay )

• Works switching upto 10A

• Fingerprint add on

• Exit button add on

• Easy to use
Has clear beeps to indicate what is happening during operating and programming

CONs

  • Range not great for xSeries

  • Small from factor ( but tall with the Relay )

“HACKS”
:man_shrugging:
I should have, but didn’t try the common vulnerability, but this would not be used in a high security environment

PRICE
USD$15

SUMMARY:
It’s OK, It does what it says on the tin, and some good add ons, but the range is …meh
BUT
if you are interested in a better performing Access controller

get yourself an xEM Access Controller v3

LINKS AND RESOURCES

https://www.aliexpress.com/item/1005004937146776.html?spm=a2g0o.store_pc_home.productList_2004301150392.1005004937146776

POLL

Rating by the community :robot:

PLEASE ONLY VOTE IF YOU HAVE ONE OR HAVE USED ONE

:star: = :poop:

:star::star: = :pleading_face:

:star::star::star: = :neutral_face:

:star::star::star::star: = :grin:

:star::star::star::star::star: = :trophy:

# relay module IC card 13.56 mhz access controller
  • 1
  • 2
  • 3
  • 4
  • 5
0 voters
2 Likes

That looks like a regular old mechanical relay, not a solid state one. But I don’t think that many cyborgs are going to buy this anyways.

2 Likes

Yeah, My bad, I will edit, thanks.
I didn’t really pay much, if any, attention to the components

1 Like