Okay. There should be no issues there then. Hmm… yeah, I’m running dry here. Either someone here knows more, or the PM forum…
I ran dry ages ago, I do know there was an Indala bit flip with the demod you can do, but I don’t think that would help here.
A search on the Discord Forum like Rosco suggested should be your next step, but if you have no luck ( Make sure you search well )
You could also try the Proxmark Discord… Standby, I’ll grab you a link
Here ya go
If you’re not getting good reads from a full size card, put some distance between it and the Proxmark3… sometimes the signal can to too strong… I can’t type put the full explanation here from my phone but try different separations from a few mm to 5cm
The coupling seems okay: each time he gets the same result from the command. It’s just that the PM3 client doesn’t seem to be able to interpret the sample.
What about a
lf tune
( dynamic Voltage display )
And try approaching the Proxmark to find the lowest Voltage drop, therefore best coupling?