Segway eScooters with NFC Lock

Lounge
1

Hey all,

I recently saw that a few of the new Segway scooters in the P series, the P65 and P100s, have NFC cards to tap and unlock with. This caught my attention for implants and went looking. I found a Reddit thread where someone got NFC bracelets to unlock their scooters with,

https://www.reddit.com/r/ElectricScooters/comments/zzgwr3/i_made_an_rfid_bracelet_to_lockunlock_my_segway/

I looked and those bracelets are using ISO 14443A chips. Does anyone know which implants would be compatible with this scooter? I have a feeling it’s the xMagic and Mifare tags, but I could be wrong.

I have the Apex Flex. Would it be possible with that chip or do I need an xMagic too?

Thanks!

2

Short answer; Apex can’t emulate a mifare chip. You’ll need an xMagic.

2 Likes
3

I figured so. I’ve always wanted one anyways :smiley: Just another reason to get more upgradded!

4

Longer Answer (Since Amal sniped me)

Well, Quite a few of the HF implants use ISO14443A

The ApexFlex doesn’t mention it on the store, but if you scan it with TagInfo, you see

Screenshot_20231023_071541_TagInfo
Screenshot_20231023_071541_TagInfo1079×633 95.2 KB

Screenshot_20231023_071607_TagInfo
Screenshot_20231023_071607_TagInfo1079×617 130 KB

There may well be more to it than the protocol, but to confirm, the bracelet he used was a Mifare Classic 1k

Here’s the link

HECERE IC ISO 14443A RFID Silicone Wristband/Bracelet UID Changeable Sector0 Block0 Rewritable(Pack of 5) https://a.co/d/e54XfIL

So

Yes you are correct, xMagic, FlexM1, FlexMT

I read it ( reddit ) and the dude just used the dreaded White Cloner.

Basically the easiest way is to copy the card onto an xMagic

Yeah, you really should, its a great implant

of course
You could also TRY and use the Apex, and IF it is compatiable, it MAY read a little easier, BUT you’ll need to figure out HOW to enroll a new “Card”

2 Likes