The anti🚫-derailment🚃 & thread🧵 hijacking🔫 thread🧵 ⁉

[enginerd]

@Pilgrimsmaster

@Eriequiet

I’m not sure it’s technically the smartest thing to have floating in the cloud

I have pretty much what you are suggesting, but I store it as a link of to my own personal server

Your mind is in the cloud, and that’s probably the most personal thing that you can have…

Joking aside, I agree, it’s better to host that on your own server as long as you do it right. Otherwise, @Pilgrimsmaster’s brother might end up indexing your personal info…

[Eriequiet]

@enginerd

it’s better to host that on your own server as long as you do it right.

1. I don’t have my own server

2. Let’s be real… chances are google is probably more secure than anything I setup… provided I don’t leak my login credentials

[yeka]

@Eriequiet

Problem is, I’m not sure it’s technically the smartest thing to have floating in the cloud

upload an encrypted photo to https://encrypted.cards
It’s in the cloud, but the provider, me, can not see the content.
You’re also free to copy and modify the source code so you have full size images and what not, I’d even help ya.
This tech is the only solution to these kind of problems… I should make a version for documents it seems.

Maybe check out https://cryptpad.org which seems to be basically the same tech but a full office suite

[Pilgrimsmaster]

@yeka

It’s in the cloud, but the provider, me, can not see the content.

I trust @yeka 's security know how, He’s a smart cookie and if I didn’t have my own solution, I would use his…

[Aoxhwjfoavdlhsvfpzha]

A little while ago there were some folks on here talking about making a sort of coil sticker that you could stick to the back of your phone to try to boost the NFC range a little, anyone remember if they had any luck?

My phone will scan fine without a case, but the case is just thick enough to make it take a little more time and effort to get lined up than I care for, just needs the tiniest bit more oomph

[Pilgrimsmaster]

Here is the thread

Resonant Repeater Stickers

I want to create flex PCB stickers that are cheap and you can just slap on stuff to reshape the field to couple better with implants. I did some calculations about “on-board” capacitors that are just copper pours so we can create the stickers without needing to populate parts or add any z-height. My calculations indicate that two 1cm² copper plates on a 0.13mm thick polyimide flex PCB will create a capacitor of 22.5pF C = ε0 * εr * (A/d) 1cm2 on 0.13mm thick polyimide: C = 8.85⋅10−12 * 3.3 *…

Readers digest version

Has been started, progress made, VK Team busy with Apex, still a viable product, just not the priority at the moment

[Eriequiet]

@Pilgrimsmaster

busy with Apex,………………just not the priority at the moment

rant
I want apex to launch and succeed… but god there’s so many things are are less important than apex, that I care more about…. I want apex to get out of my way
/rant

[Pilgrimsmaster]

@Eriequiet

many things are are less important than apex, that I care more about

Go on then, give us your list in order:- ( I have a few I am keen for , but also still more than ready to play with Apex )

[Zwack]

I WANT IT ALL, AND I WANT IT NOW!!!

[Eriequiet]

In order?

Bro I’m ADHD and wildly unmedicated, my priorities have no perceivable or lasting order

But,
Hf sticker boosters to mount on phones
Hf sticker booster bandaids to mount to cyborgs

Nfc temperature sensors, I know disruptive is working on this… but I’d like a DT option as they have my trust

A larger payment conversion format, say 1” disk

More XLED color options/ restock

Bodybytes

Flexnt2.0 blinkymcblinkerton

Narrow FlexEM format

Magic ntag, various format

Etc I feel like I had more but I can’t remember off the top of my head

[Pilgrimsmaster]

@Zwack

I WANT IT ALL, AND I WANT IT NOW!!!

OK Freddy! Calm down

[Pilgrimsmaster]

my OPINION

@Eriequiet

Hf sticker boosters to mount on phones
Hf sticker booster bandaids to mount to cyborgs

Im also keen for the phone sticker, although I have no complaint with my current phone, but I like my RFID like I like my woman “Fast, Free and Easy”

@Eriequiet

Nfc temperature sensors, […]… but I’d like a DT option as they have my trust

100%, I am open to others, but I highly doubt that anybody would have my trust as much as DT/VK have earned over the years.

@Eriequiet

A larger payment conversion format, say 1” disk

Have you asked Amal about a custom option? I don’t see why he wouldn’t unless there was technical reason ( antenna chip capacitence )

@Eriequiet

More XLED color options/ restock

What colours are you thinking? I know a lot of people wanted Purple/violet etc.
RGB? Programmable Patterns?

@Eriequiet

More XLED color options/ restock

Same colour options as the xSIID I am guessing?

@Eriequiet

Bodybytes

Pretty interesting and practical, it will be interesting to see the specs of the final design, size, transfer speed…

@Eriequiet

Flexnt2.0 blinkymcblinkerton

Personally, I don’t think this one will be too far off. Purely speculation

@Eriequiet

Narrow FlexEM format

I think physics is the issue here, you could have a long skinny narrow one, or a short tall (z ) one, but neither would fit under the skin very well.
(I found something ( short tall ) a while back, but have struggled to extract it in one piece)

@Eriequiet

Magic ntag, various format

I’m still keen for this also, I actually have a Card and send it to Amal for a narrow flex conversion, I still think the chip is not a great performer though unfortunately

@Eriequiet

I had more but I can’t remember off the top of my head

I am also really looking forward to the xMagic
and the NExT2 ( because I dont have any blinky, and … I have a use )

https://whensoontm.com/

[enginerd]

@Pilgrimsmaster

I don’t see why he wouldn’t unless there was technical reason ( antenna capacitence )

Inductance, the antenna is a coil and it forms a tank circuit with the capacitance of the RFID chip. So it’s chip capacitance and antenna inductance.

Ok, I’ll try to stop being pedantic and go back to my lab…

[Aoxhwjfoavdlhsvfpzha]

Well, both need to be considered actually, coil self-capacitance plays a role in determining the self-resonance frequency too

[enginerd]

Yes it does… And now my brain is in distributed element mode, help!

[Pilgrimsmaster]

@enginerd

chip capacitance and antenna inductance.

Yes, that was my bad
Indeed it SHOULD have been

@Pilgrimsmaster

( Chip Capacitance )

[Satur9]

Don’t forget about the voodoo black magic witchcraft

I keep building antennas and I almost forget to add that ingredient every time

[enginerd]

@Satur9

Don’t forget about the voodoo black magic witchcraft

I almost forget to add that ingredient every time

Been there, done that…

[yeka]

@Eriequiet

I want apex to get out of my way

You know Amal could literally spend years around the Apex right?
Making the implant is step 1.
Even if Apex implants were to be finished tomorrow and DT has thousands in stock, there is still a lot of marketing to do, a lot of software to design & write, a lot of lobbying… the list goes on.

I sure also want Amal to do some crazy biohacking projects for a smaller crowd, but I don’t think he has much time for it.

@Pilgrimsmaster

@Eriequiet

More XLED color options/ restock

What colours are you thinking?

Dont forget that this is an option:

You can have colored xLEDs NOW

So this is all based on a message by @Satur9 so props to him and his apex mega research. The chip of xSIIDs have a command to disable the NFC side, a silent mode. It’s a permanent setting though, so it really turns into an xLED, no way back. The command is A2E88100F848 My plan is to eject the xSIID at my installer, cover it with plastic, write the command and then put it 5mm from my NExT, just like a blue xLED. This is basically just a note for me, but I bet some people are interested. Btw…

[Eriequiet]

I know I know,
I don’t hate the apex…
I just want new and exciting stuff