Atilla is doing well, thank you!
It’s just the… “L” word that keeps me busy.
Also I need to sort some memories out.
That hug might be postponed, due to the lack of options to install. For some reason I was not keen to attempt it myself.
Also I need to sort some memories out.
1 Like
I would like to talk to a dentist who is specialised in implants.
Maybe it would be possible to design a screw that could fit a Titan with enough place to let it wiggle a bit.
Maybe it will be nothing but a good chat. Even worse would be actually making it.
This project could cost +2k, not including the magnet, of course.
I bought the Titan because ̶o̶f̶ ̶t̶h̶e̶ ̶h̶e̶a̶t̶ ̶o̶f̶ ̶t̶h̶e̶ ̶m̶o̶m̶e̶n̶t̶ I wanted something special… well being able to hear other peoples words from my own mouth would be exactly that, I guess.
Hopefully I’ll be back with some good news about this in a month.
Literally hearing radio waves with your dental implants. We’re sure making it easy for the crazies.
3 Likes
Exactly your project was the inspiration.
To explore something new, rather than sort out an issue (unlock a car, or so).
I’m pretty sure the project is possible with decent resources.
Lots of planning to be done. I currently don’t know what I don’t know, hence I need a chat with an actual specialist.
I had to dig this one up from the archives ( of my brain ), hence it took me about 8 mins to find where I had read it .
This might be a good bit of info
Here’s the Post where Amal mentioned the tooth and the magnet 
& 
1 Like
Let me know if you want to collaborate or just need someone to bounce ideas off of. I’ve put so much in to the tragus headphone project just for it to yield no fruit, I’ve become disheartened. A new angle on the idea would be refreshing.
1 Like
Sure, there are known unknowns:
• Transmitter/Amp, maybe TDA2030, or some chip with shortcut protection
• Flexible, wearable antenna. Will have to be custom-made. Maybe 1ohm to maximise output?
• Power source, maybe 2x9V
• A wearable housing
• Cooling? Liquid cooling would be overkill but’d look dope =)
• Fool proofing
Most of my other questions would be implant related:
• How to tune the magnet? Spring loaded? Between 2 springs? Screw down with abutment?
• How can a crown be installed on the abutment?
• How can a blinky installed in the crown?
• How can I get a life-time warranty on the project?
9V batteries aren’t very good in terms of current source ability, nor capacity. They’re also not rechargeable, which is wasteful.
I was using a lithium ion battery hooked up to a little charge controller board that had a built in boost converter to get 18V. Low efficiency but it worked okay.
Lucille Ball had a story related to this idea…
Has anybody done a field strength calculation for the titan?
3 Likes
no pork chop…
shit. audio is fucked up… please hold…
1 Like
8 Likes
My body is ready
1 Like