Remember, Dangerous Things don’t always stay where you put them.
1 Like
Holy smokes. I have the opposite problem. Where they got put, they stayed.
I wish mine had. I lost the ability to palm scan and the accompanying cool factor.
Interesting, I thought there was far less forgiveness for proximity
Just think about the read range / coupling for an xSeries, there is some wiggle room there, but obviously some other factors to consider are the specific reader and its power output.
Planning is also important, if you were to get a flex implant, the spacing would need to increase also.
and in the same breath, if your implants are at right angles, such as positions 0 & 1 and 4
& 5 this angle is sufficient to isolate the antennas from the other…
Does that make sense? (sorry, that is poorly worded)
Sort of?
I think your saying if you do this
You have can get similar chips closer to each other, but I thought chips on your hand always had to go perpendicular to fingers
Think of the blade of your hand in relation to the top of your hand
Or your thenar/ webbing to the top of your hand…
standby, let me grap a link to a relevant post…
This post and the thread probably of interest
Just pretend your reader is on whatever you want it to be and pretend you have a chip in that place.
1 Like
So just checking, could I install a xm1 super close to my xEM on semi knife edge? (Practically touching?)
Different frequencies right?
Correct
xEM = LF 125kHz
xM1 = HF 13.56MHz
AWESOME combination, by the way
Depends on you definition, but ≥ 5mm apart
So I shouldn’t treat it like a xled next to a chip?
hmmm, any xSeries you should try to keep ≥5mm apart to reduce the chance of them impacting/ colliding.
On their own they are surrounded by “padding” where as, glass on glass is a problem waiting to happen.
What distance apart is the xLED you are referring to?
1 Like
Something I’m pretty sure I got wrong now lol
I thought xleds could / were implanted as close to the x series tag that matches its frequency,
I thought the 5mm was only for cross talk
2 Likes
At least you asked before installing.
Would be cool to have xm1/xEM combo similar to the nExt
2 Likes
Haha, if only you knew… I have been harassing Amal for that same thing for quite some time… unfortunately it is not as simple as it seems.
However
There is this
Oh, by the way I LOVE your Avatar
.
.
.
Hunch hunch
1 Like
What whaaaat?
2 Likes
Haha 