xM1 ATQA:00 Anticollision Error

[amal]

@Jirvin

From talking to Iceman, he recommend trying the following (copy it all then paste it (last command you will have to hit enter on)):

hf 14a raw -p -a -b 7 40
hf 14a raw -p -a 43
hf 14a raw -c -p -a A003
hf 14a raw -c -p -a ffffffffffff787788C1FFFFFFFFFFFF
msleep 2000
hf 14a raw -c -a 5000
hf 14a raw -p -a -b 7 40
hf 14a raw -p -a 43
hf 14a raw -c -p -a A000
hf 14a raw -c -p -a 01020304049802000000000000001001
msleep 2000
hf 14a raw -c -a 5000
hf 14a info

I just received an xM1 back from @Vicarious that was responding this way and I followed these instructions and it has been recovered;

[usb] pm3 --> hf 14a info
[=] Card doesn’t support standard iso14443-3 anticollision
[+] ATQA: 00 00
[usb] pm3 --> hf 14a raw -p -a -b 7 40
received 1 bytes
0A
[usb] pm3 --> hf 14a raw -p -a 43
received 1 bytes
0A
[usb] pm3 --> hf 14a raw -c -p -a A003
received 1 bytes
0A
[usb] pm3 --> hf 14a raw -c -p -a ffffffffffff787788C1FFFFFFFFFFFF
received 1 bytes
0A
[usb] pm3 --> msleep 2000
[usb] pm3 --> hf 14a raw -c -a 5000
received 0 bytes
[usb] pm3 --> hf 14a raw -p -a -b 7 40
received 1 bytes
0A
[usb] pm3 --> hf 14a raw -p -a 43
received 1 bytes
0A
[usb] pm3 --> hf 14a raw -c -p -a A000
received 1 bytes
0A
[usb] pm3 --> hf 14a raw -c -p -a 01020304049802000000000000001001
received 1 bytes
0A
[usb] pm3 --> hf 14a raw -c -a 5000
received 0 bytes
[usb] pm3 --> hf 14a info
[+] UID: 01 02 03 04
[+] ATQA: 00 02
[+] SAK: 08 [2]
[+] Possible types:
[+] MIFARE Classic 1K / Classic 1K CL2
[+] MIFARE Plus 2K / Plus EV1 2K
[+] MIFARE Plus CL2 2K / Plus CL2 EV1 2K
[=] proprietary non iso14443-4 card found, RATS not supported
[+] Magic capabilities : Gen 1a
[#] 1 static nonce 01200145
[+] Static nonce: yes

You can see I skipped the second msleep 2000 because I was copy/pasting at such a slow rate it was pointless… but I did keep the tag in field the whole time… which is easy when it’s not inside you. If you are having problems recovering, consider taping the pm3 antenna to your hand to ensure it doesn’t move during this process.

[Jirvin]

@amal

I just received an xM1 back from @Vicarious that was responding this way and I followed these instructions and it has been recovered;

From what Iceman and Philippe said, they believe mine to be a memory issue. I had a dump of the implant before I done anything to it and they already could tell something was bad.

I have tried those commands a few times to no avail and ensuring the tag was in field the whole time.

Pretty cool it worked for another tag though!

[Blu3Rats]

I tried this before and just did again. Several times to no avail. Its pretty easy for me to keep my implant in the field and all the commands came back successful. My chip is giving me no love