COVID-19 projects

Well count my order in for 2 weeks from now. I was going to order the xM1… but not so sure now.

1 Like

This was the last post I saw, I am not sure if Amal has settled on the size, But I hope that narrows it down for you

1 Like

I’ll make a parameterised moel and print the largest.

Thanks :heart_eyes_cat:

1 Like

If you want an implant for passwords /pins via a changeable UID ( NUID ) implant, you currently only have 2/3 Options
the FlexM1 range

If you go for the Vivokey line, you are kind of playing a different ball game…

Sounds like you have some deciding to do

1 Like

tenor (5)

1 Like

Missed this one? Or is it a hidden page like the xglo i found the other day?

Or is that an Apex name I have just not heard used.

Mark me down for a flex m1 / xapex when the time comes. :wink:
editPulling out on the m1. Need more than 4 characters. Will start looking into LF readers and use the EM side of the NExT

It is not available yet, hence

This post of Amals explains the versions of the FlexM1 well


I saw on discord
@kayTH got some info from Michelle

michelle sent me the dimensions for the apex max
3x13mm, possibly 14mm

1 Like


That is awesome, Can we expect to see one of those included in our next order, or on the DT Store in the Merch?

1 Like

The only good thing that might come out of the coronavirus virus crisis is that we now have a good reason to go out into the street wearing face masks to confuse face recognition and avoid being tracked by CCTV cameras - something that had previously been outlawed in several countries.

Now if everybody wore DT masks, Amal would register everywhere in the world at the same time. It would be much more discreet than a Guy Fawkes mask, but just as effective :slight_smile:

1 Like

dunno really… a friend made it… I’ll look into it :slight_smile:


It’s been awhile, and things are headed back towards normalish, probably just in time for the second wave. I’m curious though, how’d those projects work out? Those of you that had intended projects, did you get any complete?

My work never stopped, but it sure slacked off, thus i had a lot surplus time. Fixed my Car, broke my Truck. Didn’t get any magic toolbox time, but I did work on the 55hzLED some. Opened a fleamarket booth selling bee traps of all things. Generally did positive things with the extra time.

Quite lucky here in NZ, Government Paid lockdown, and we have had zero covid cases for around 3 weeks now. So things are actually back to almost normal with the exception of a closed border…

A lot of online learning, jobs around the house, No RFID based projects, but I have parts to start on some now.

Bummer, but at least it is still currently a nearly final version.

To catch and keep or to kill??? :honeybee: :heart: :honey_pot:

Live and let die.

NOT for honeybees, this catches the wood bee / carpenter bee that bores holes in lumber. As in “Lumber” the stuff your house is made of. Think giant flying termite that stings.

Actually selling well. Expanding to a few other fleamarkets this weekend. Might become significant not my main job revenue.



1 Like

My corvid-19 to do list consists of:
-finishing my Lab power-supply (0-60V 0-50A)
-learn how to use the proxmark
-tinkering with making an external antenna on a p532 board
-clean out the garage
-make a XEM access controlled cabinet

I got most of these done🙂
did not get to fiddle with the pn532 and I only got to clone my yale fob to my flexM1 :stuck_out_tongue:
But I got to convert another door with the access controller in adittion, so that makes up fot the missing points on my list.

Oooh, I almost forgot…
I also had the time to repurpouse an old 120L hot water heater into a stainless BBQ


My projects…

Oh man. I can’t even talk about most of them.

I’ll see if I can post a video of something though.