Easy Guard : Push to start installation ( with easy removal option)

[Pilgrimsmaster]

@Hanan

Can you see what makes the difference?

I can tell you the last one you listed was the most likely to the one I used above

Here is the link to the actual store I bought it from

NZ$ 22.30 49%OFF | 12V Auto Car Alarm One Start Stop Button Engine Start Push RFID Lock Ignition Switch Keyless Entry Anti-theft System RU In Stock
https://a.aliexpress.com/_mNcZ0k3

@XEMON

Do you think its possible to mount it in parallel to the key ignition?

Yes, If i left the key barrel in position, I could have place the Start button elsewhere and I could use either to start.

see here

@Pilgrimsmaster

Q. What if I want to use a key as a back up

A. If you put the push to start in an alternative location and leave the ignition in situ, you could use either key / implant / fob to start the car,

I have not tested the circuit and therefore I am un aware if there is any circuit protection so a diode may be required to protect. ( They do claim it, but I don’t known whether to trust it )

Or
you could just leave the keybarrel and a tool or two (this one only needs a Phillips screwdriver ) hidden in the car.

@Pilgrimsmaster

I didn’t mention this in my post, but I have left the cylinder in the glove box (could be hidden further if you wanted)
with a screwdriver and 2 minutes you could put the Key cylinder back in…