I’ve found myself at a resort in cabo mexico and i would like to copy my key card and maybe write it to my implant ( next & xmagic) i have a flipper with momentum
Its not worked so far. I emulate and it’s not working also im a bit tipsy btw
Please help thank you
2 Likes
This one
What have you tried so far? Is your xMagic a gen1a?
Not working how? Does the reader react to it at all?
1 Like
I get no lights on the door reader when i press emulate
Im not shure of the gen1 or 2 but its les than a year old
1 Like
Good sign, means it could be a bad connection instead of a bad emulation
Apps > NFC > NFC Magic > Check Magic Tag
1 Like
Nice
More, then write, then choose the room key, I believe
1 Like
Ok flipper says success on the write
But if i can’t open the door with the flipper on emulate hows it going to work on the implant?
1 Like
Since the flipper didn’t seem to react as a bad tag, it seems to me that the door just wasn’t getting a good connection to the flipper
Whether you’ll be able to get a good connection with the xMagic, who knows
Be sure to let us know
1 Like
I’ll Finnish my drink and give it a try
100% I’ll have an update
Thanks
P.s. nfc tools for android looks lone the implant and the card are the same as far as i can tell
1 Like
What am i doing wrong? Lol
Try taking off the case
And pickup some MFGC’s for future trips, of course
Is a mfgc like a ug4 but a card? I have one of those but not with me.
I do have some nfc 8k fobs but i don’t think it will do much good if the flipper can’t even open the door
Thank you
1 Like
No luck with your implant either, I’m guessing? :'(
Nope, it’s a passive repeater, just makes it a little easier to couple with picky readers
The new little repeater dots i have those also but not with me
Ive tried withe the xmagic and no luck
Nfc tools cant read the flipper on emulate.
Seems strange am i doing something wrong?
flipper emulation sucks at mifare classic on non spec sturn readers (low quality, battery powered, design over function, bunch of reasons) we made a command for this
TLDR; the flipper emulation not working is not exactly abnormal.
if your implant isn’t working: you’ve not got sak swapping going on your key so that’s not the issue with your implant. it is likely the reader is too low in quality/design to be able to communicate with an implant so small.
unfortunately this does just happen sometimes not all readers love implants.
3 Likes
Very informative but unfortunate thank you
But why would my phone not be able to read the flipper?
because the flipper emulation isnt great and phones too arent always hitting the mark
3 Likes
Do you carry a test card pack or similar with you?
If so, try writing to a card and test that.
3 Likes