Magnets! Magnets! Magnets! 🧲 ( R&D )

[amal]

@ChuckyCheegles

So, in the possibility of being attacked for ressurrecting an old thread

We don’t do that here zombie any thread, as long as it’s relevant!

@ChuckyCheegles

PEEK is a little expensive but much cheaper than machined titanium

The problem with PEEK and PEAK is the forming temperatures are high, ruining magnetic material (curie limit).

@Az_F

What I wonder is why we can’t keep going with this process until there’s a sufficient coat of that alone. Too slow? Too uneven? Can’t build up multiple layers?

Again, high temps… but also it’s not a hermetic seal. The particles do not bond together well at the atomic level, they just mash together, but that does not keep water out and bodily fluids will eventually attack it. This is exactly what we tried with the m31… check the video about “DT isn’t doing magnets anymore”… I cover a lot in there… and rest assured I spent tens of thousands of dollars working on magnet designs and coatings that all failed.

That’s not to say that more research shouldn’t be done. Titan is discontinued because of the expensive process to make it. Nearly all of the suppliers involved raised prices considerably to the point I couldn’t see making another batch… so research needs to continue.