Proxmark3 Easy (Iceman/RRG)
There are a couple of different versions of the PM3 Easy available 256kB and 512kB ( AVOID the 256kB, the smaller size is not future-proofed, you will have to give up some functionality)
SOURCE
Dangerous Things, eBay, Amazon, Aliexpress
CAPABILITY
MOST Low Frequency 125kHz, 134kHZ
MOST High Frequency 13.56MHz
If you are planning to get one, and you have limited experience with such things get it from Dangerous Things, and here is why:-
The Dangerous Things version preloaded IceMan Fork, knowing this will make setup easier.
Dangerous Things and the community should be able to help you through most / any issues.
Dangerous Things provides a setup guide
Dangerous Things after-sales service is outstanding
The little bit extra you pay is for the time taken to flash Iceman onto the Proxmark for you.
We should be Supporting Dangerous Things.
To be aware of:-
WARNING
A frequent pitfall of the Proxmark during setup is mismatched client / firmware, ensure these match or you WILL experience issues.
PROs
• Preloaded with IceMan Fork ( Dangerous Things Version )
• Lightweight
• Compact
• Portable ( full functionality you will need to tether to Computer or Phone )
• “Cheap”
• Cheaper than RDV4
• Will cover most, if not all of your RFID Read/ Write requirements
CONs
• Not a simple setup
• Not particularly robust, due to its design ( Can’t just throw it in a bag and forget about it )
• Factory antenna not optimized for xSeries implants
• Not compatible with the PROXLF ANTENNA*
*There is a possibility to make your own improved xSeries antenna ( Community member project )
PRICE
$55-$70
Summary:
Setup is not ideal for a beginner, however, there are many guides and people that can help you out.
Once set up, the use of the PM3 Easy is actually pretty easy, with the built-in help command line.
The Firmware is an active evolving and updating project, increasing capability.
It is a quite powerful and capable device
The PM3 Easy is almost as Capable as an RDV4 @ around 20% of the price
Consider supporting IceMan and his work
https://www.patreon.com/iceman1001
Rating by the community
PLEASE ONLY VOTE IF YOU HAVE ONE OR HAVE USED ONE
=
=
=
=
=
- 1
- 2
- 3
- 4
- 5