Proxmark3 fullimage not flashing because of Lock Bits, but bootloader works!

[LOCOSP]

Little Support UPDATE

I was mange to flash iceman firmware to my PM3e after few adventures…
I did all it is written in this awesome tutorial, just notice the best practice is to start from scratch:

• fresh RaspOS
• new cable
• fresh pinout etc.

How to unbrick a PM3 easy!

Hey everyone, in light of @StrwbrrySam’s topic about his bricked PM3 easy, I thought I’d post a guide on how I recovered my PM3 after purposefully bricking it (yes I’m crazy, but it was as a test of the process). First: DO NOT BOTHER WITH THE BUSPIRATE - while it is recommended elsewhere as an easy / cheap option, it was painful to use and did NOT work (for me). Please feel free to make suggestions / give feedback. If you are trying to follow this guide, feel free to PM me here, message in thi…

Cheers!

#EDIT

I’ll continue in this thread, tell me please if I should do something with the config of PM3 easy because it read all but not my NExT implant. As i know, might be a problem reading LF(hard to locate best spot) but it doesn’t see NTAG216 neither. Please give me some clues.