works for me
however
Not quite sure how you can BOTH for 3 items.
Steel wool
Brass wool
Wet sponge
Eriequiet setting up polls drunk again 
3 Likes
Doesnāt seem to load properly on my phone, but loads fine on my desktop.
Scratch that, itās working fine on my phone now lol
1 Like
Brother I feel that so hard. Kid 2 doesnāt like night time(I swear he has sun downers), my blood caffeine ratio has to be around 20%. Iām peeing orange and smelling colorsā¦
3 Likes
That was my phone view above (Brave browser)
I checked his poll syntax, and it all looks fine.
[poll type=multiple results=on_vote min=1 max=2 public=true chartType=bar]
How do you clean your Soldering iron?
- Brass wool
- Steel wool
- Wet Sponge
- Both
- Iām supposed to clean it?
[/poll]
Might be your browser
1 Like
Ahhā¦missed the update
Nevermind
1 Like
Awesome, just dont be surprised if it is a slow onset.
ā¦but hopefully not at all
Are these your first implants?
1 Like
I did that mostly just for you,
Took you longer than I expected lol
3 Likes
Is the fact that it appears to scan payment cards with ease a scarer for card companies who might dig their heels in harder against the legitimate chip community?
Well, after almost 24 hours Iām still not experiencing swelling, so fingers crossed Iāll go free.
These are my first two implants, yes.
Iām having a tiny bit of second thoughts about having them next to each other in L2 and L3, as it can sometimes be hard to scan the correct one with my phone, as I donāt know the exact place of the antenna. Do you know if itās possible to āforceā a slight migration to L1?
2 Likes
Thatās something you will learn with a bit of practice.
Your hit rate should be pretty good, and you
If your hit rate is not good enough from practice, and you think you need to move it, It is by no means an easy thing to do, and it may not work at all.
We (community) could provide a couple of suggestions for you to try if you feel you need to move it
BUT
In reality, if you wanted to move it, removing and replacement that would probably be the easiest and most realistic option
2 Likes
Alright, thanks for the feedback. Itās not a huge issue with placement, so Iāll leave it as-is.
Since I have you around, I saw you posted some threads on the conversion process.
Here is a picture of the LAKS Pay module that Iād be looking into getting converted. Can you say from this if itād be a good candidate for conversion?
Thats definitely an @Amal question.
Yours looks slightly different from the LAKs conversion service example
My GUESS is, it looks promising, Hopefully Amal can just encapsulate it for you BUT thatās purely my guess.
I loved having my Payment conversion
Good luck with yours
1 Like
3 Likes
Thought this was pretty neat. Might be good for turning an apartment deadbolt lock into RFID.
2 Likes
I can convert these yes.
1 Like
Thanks for that, I have one too but i wasnāt aware.
I add that to my list of things to do
3 Likes
Remove or replace?
1 Like
Just remove on most models, but can replace if youād like. On most revisions, the system will still work completely fine without it. Itās meant just to keep the clock during power outages and such.
On the 1.6 motherboard revision, the cap is required for the system to boot.
Gold colored supercaps are less likely to leak, and were used on the 1.6 revision and some 1.4 motherboards. So those are usually fine to leave.
Every other revision though, just rip her out, and clean up any existing leakage with IPA.
Quick edit: great resource: Xbox:Clock Capacitor - ConsoleMods Wiki
2 Likes
So that one $0.70 part was responsible for destroying all those consoles? And the shitty chip soldering jobs?