The antiđŸš«-derailment🚃 & threadđŸ§” hijackingđŸ”« threadđŸ§” ⁉

You are more likely to end up hugging the high voltage connections like there was no tomorrow


Sparktsserie Ham Spiced anyone?

:crazy_face:

1 Like

you just gotta stim the right muscles is all :slight_smile:

1 Like

Is it just me, or do y’all see shit like this IRL and think, Huh, @coma.

11 Likes

no need
 just put some tinfoil out


5 Likes

:crazy_face:

Ok, I might be playing too much Titanfall 2.

3 Likes

Well
you did it

welcome-to-the-group-5z46ly3oqu9ztcep

It wasn’t the best self install i have seen, but also not the worst.
Well done on bevel down, and it even looks like you MAY have rotated to bevel up after penetration, performing a modified (reccomended) install, if so :+1:, if not, justvtake the credit.

NExT time :wink:
Tent and palpate

Palpating / tenting the skin prior to can only help to separate layers.
Here is a video of Amal doing just that at the 7:27 mark

FYI, the white part can be removed if you didn’t already know (somebody else didn’t)

Thanks for sharing

2 Likes

Thanks! lol, I realized the white part could come off very shortly after I stopped recording.

I did rotate when it was in there, but only because I kind of lost where the end was and I was too nervous to just lift up against the skin to find it while the bevel was on top.

On the tenting part
I tried to do that a few times before doing the implant and I could never seem to get my skin pulled up the way that most people in their videos are able to. I have short fingers and very little like webbing between my thumb and forefinger (again comparing to what I’ve seen in other videos).

I have an LED that I’m planning to do in my right hand, but I’m hoping to find someone to implant that one for me since it’s my dominant hand and I do think the placement could be a little better than what I got in my left hand myself.

3 Likes

Are you planning on any more implants after that?

My personal recommendation would be, save the P0 of your right hand for another implant (another recommendation would be an xMagic), my reasons for these recommendations.

  • The LED implant you refer to, whether its an xLED or xSIID, Will read more easily and shine brighter through thinner skin, in P1-P4 for example.

  • The xMagic has a T5577 and a Mifare Classic chip.
    The T5577 is the same as you have in the NExT, is can emulate almost all LF chips, so having more than one T5577 is not a bad thing.
    The Mifare Classic is probably the most common HF Chips and therefore the most “usable” plus it has a changable (N)UID

  • The P0 position is a good spot for presenting to readers.

4 Likes

I’ll echo the AI. Reserve that position for a more functional chip. The xled is awesome but just cosmetic.

3 Likes
3 Likes

that reminded me of this :laughing:

Probably could get his channel to sponsor the idea of the “Endlympics”

Bruh, literally got served that save video on my shorts feed today.

The algorithm works in mysterious ways


you’re gonna want about 30%, unless you have a sticky wicket
 in which case you’ll have to go above 50%

1 Like

Security through obscurity continued.
Plugged a switch into the mic jack of a handie talkie for Morse code XD

For those who got their ham license out of a cracker jack box after the removal of Morse code from the exam, like me, according to the comments, he’s reaching out about your cars extended warranty.

2 Likes

3 Likes

Haha, not even close.
There were not enough characters for that.

My morse is rusty, and I can transmit faster than I can read.
It was something like

His “test”
5
O
H
5
I
O

Then his sequence
CQG CQD[I lost it around here, but finished with something like] TX

So in a nut shell
My best guess, as I am not a ham, but
their callsign, his callsign, [the actual message that i completely missed] TX (which might mean transmit, so guessing, “end of transmission”)

I AM NOT A HAM :radio:

but these people are

2 Likes

Lol probably [call sign] CQ CQ CQ or something similar. I haven’t messed with morse code since I first watched Maximum Overdrive.
I’ve downloaded Amals response, but I haven’t found an app to quickly translate an audio file on my phone to text. But I’ll translate it when I get home so I can have the audio play while I look at a morse code chart and hit pause and play while decoding lol

1 Like

I hadn’t seen that when I sent mine; I just listened to it, His were actual words so its easier to fill the gaps when you get lost.

I wont ruin it for you.
I’ll just say, It was a much longer message than the video, but you should be able to work it out pretty quick.

3 Likes

Thank you!
I’m out and about acting stupid at the moment. So I shall decode his message in the morning when I’m in front of my PC and not a phone that is at 25% that’s sitting in front of a bar, sitting in front of a wall of regret lol

3 Likes