Upload firmware into proxmark3 easy

[dyy]

Hi all,
i would like to help from you guys, im into rfid stuff and bought pm3 from amazon.
and couldnt figure out how to use pm3. few hours searching then i found DT forum.
and follow step in forum but i can make pm3 work,

here is issues,
window cant find pm3 from Port3.
had proxspace but cant find pm3 connected.

so i was thinking that this pm3 didnt have any firmware so i would like to ask that
can anyone help me out to upload iceman firmware onto pm3.

[yeka]

does this help?

PM3 Easy - Easy Windows 10 Firmware Flashing Guide

I’ve been butting heads with flashing my PM3 Easy with the latest Iceman RRG using the official guide. Whenever I had to compile it would spit out errors that I couldn’t get around, so I twice gave up and just flashed with the official release. It’s also new territory for me, so it was incredibly confusing. I must have passed this forum thread for Precompiled Windows Clients about 500 times. What an idiot So for anyone with a PM3 Easy, just head to the thread above and choose the link fo…

[dyy]

im following step but couldnt find pm3 in device manager… kinda stuck now …

[Pilgrimsmaster]

@dyy

kinda stuck now …

Try this one

FlexMT HF Reading Issues

I have had tons of problems getting various Easy models to load rrg properly… it honestly takes a slog of different variations to get it working… I have two different Easy models both with 512k and both required slightly different approaches… one of these approaches tend to work; hold button down, power up, keep holding, run pm3-flash-bootrom, once finished, let go of button but let it flash lights and do whatever the heck it wants to do, see if com port comes back eventually, if com port app…

[dyy]

finally set up.
Thxxxxx