Easily?! well, sorta, kinda, maybe
You can’t do it in the app itself, just an on off option.
although
I haven’t tried this myself ( because I no longer have the app), but I used to have an app called .apk editor.
And there were 2 options.
~“full edit” or simple edit.
With simple edit, you could change images and audio files etc.
So this is the “kinda, maybe” option…
this is also pretty cheap…
I found if you search for “IC card” rather than RFID or NFC you get more hits
here’s another option
if you watch the amazon video, it looks like the antenna is only behind the small black square at the top, that might give a better chance to couple with implants? I know sometimes smaller antennas are good
I’m going to check with my landlord, that I’m allowed to change locks so long as they have a key,
if so, I might pick up one of these
I might try to rebit the lock if possible
Well… my apt won’t let me
So now I guess I have to explore other avenues
How mutch restricted are you? The idea of striker plate and access control system should be doable with minimal visibility.
Given they won’t let me change the deadbolt, I doubt they will let me install a striker plate that will require actual modification to the door frame
I need to get or make something like a gimdow, and rig it for rfid
I might take another shot at talking to the manager again, this time trying to pitch that I can get the new lock rekeyed to match the original
I’m beginning to suspect they are using a mastering system, and me installing my own lock wouldn’t be able to be opened with their master
I don’t like the idea of there being a master key,
Anyone can find out the master one their own lock and then have the key to the entire complex
If you are going to put this work into it I would think about something like middle piece between inside doorknob/handle and lock itself that would be able to transfer rotation in case of someone opening from inside and had disconnect and motor for actuation from access system.
As for master keying there are two possibilities if it is solution provided by lock manufacturer or lazy locksmith it will be possible to create master key by comparing master wafer location to key associated to that lock.
If it was created on demand by locksmith there could be fake master wafers that make it harder and they would require more than one lock to find it or they would have to try more than one key possibility on different locks.
They don’t want me to alter their lock
My only option is a device that turns the deadbolt from the inside
The other question is where to put the reader? You might need to hide it for this to work.
I’d likely just wrap it around the door and have an exposed reader puck
I’m not altering their door, nor their lock… so I don’t think they would be afoul of their policy
Maybe I am just not thinking about exactly same lock as you. Eurolock style doors have square shaft that controls the bolt and handle is literally just pushed onto it and secured with pin. My idea was something that would control this shaft directly from inside of the door.
Different lock styles and sizes exist around the world.
Given a lack of being able to replace the lock at all the best option would be something that fits over the internal portion of the lock and when triggered unlocks it.
One solution that hasn’t been floated as far as I know is to use something like Home Assistant and an RFID reader that talks to Home Assistant, along with a lock that can be controlled from Home Assistant.
That increases the scope a fair bit as you have decoupled the reader from the lock. Home Assistant would have a simple automation that unlocked the door when a certain token is read.
Lock integrations are listed here and the Tag Scanner reads MQTT events. The examples seem to be a Tasmota connected PN532. There is also an IDTECK proximity reader integration under other.
I have the NeXt and doesn’t work with the tt lock app mine don’t read when trying to link threw app
Awesome, now I just need to figure out how to argue with my leasing office… in the most helpful mannner
(Should post a video in the show off using it thread 
)
I have the yamiry smart lock and I love it. It took a bit for me to find my sweet spot but now that I know where it is, I can open my door faster than my wife can with her finger. 10/10 would buy again.
Actually the ttlock thing is a separate company from the lock company… it’s a piece of “drop in” technology licensed to lock companies to make app control of their locks easy for the lock manufacturer.
To add on to this: in the TTLock app in the RF cards section, you can press the “Add card remotely” button to add any type of NFC card by scanning it on your phone. In my experience it was near impossible to add any implants from the lock itself, but I was immediately able to add them from my phone. TTLock just uses UID based authentication though so don’t rely on it for anything super secure.
I found Flexies worked pretty easily (on my ones), and the xSeries I had different results depending on the lock…
I have a couple of TTL Locks
and a couple of those I have reviewed
I have the TTL version of the “Rothult” cabinet lock also that I should review
@APartOfMe which one(s) have you tried?
