Xg3 installed back of left hand âposition 3â. Installer was self taught piercer. Implant immediately tried to come out of insertion hole, but plaster seems to hold implant in preferred position. We have to look at the situation again tomorrow, but seems good by far
2 Likes
I saw a facebook post today with the exact same picture and when I checked the profile picture I was like âThatâs a weirdly familiar looking seniorâ. Now I am amazed at how realistic these âold peopleâ filters are 
1 Like
Ohhh god⌠I really hope it is one of those âold peopleâ filters, otherwise I really seem like an a**hole 
3 Likes
Lol yes it is a old filter. It looks very much like my dad.
1 Like
Oha now I have to try it out too. I already know that I look like my dad when he was my age, but now I wanna know if I look like him when Iâll have his age
I know that I donât look like my father when he was my age (he was balding) and his father was decomposed so I hope I donât look like him.
1 Like
Itâs time for uncle static_voidâs Christmas special! (in JulyâŚ)
Two weeks ago I finally got the flexM1 installed.
The BFN was autoclaved by a âmedical friendâ.
Due to potential indemnification issues with medical licensing, said friend understandably didnât want much to do with the actual procedure.
The implantation was performed by another friend (CYA: Donât do this, go see a pro) after much reviewing of other peoples procedures, under the mindset of âfull sendâ and with the knowledge that âmad cyborg prostheticsâ are available if we fuck this up too badly.
There were some mildly interested nursing students in the room during the process to observe and offer general guidance as well as the occasional âeww wtfâ
There was a couple difficulties getting the chip in the hole, but this was down the the angle of insertion. Once it was in we used the back end of the needle to gently push it in which seemed to work well.
Aftermath:
Everything seems to have healed well for the most part.
Two ibuprofen were taken a couple of hours after the procedure to dull the pain after the anesthetic wore off.
I believe we may have nicked a nerve as there is some residual numbness present between the insertion point and where the webbing ends between the index and middle fingers. I am hoping that this fixes itself over the next couple of months but if not itâs no great loss.
All in all: 5/7 with rice 
6 Likes
3 Likes
I really hope you didnât autoclave your flex implantâŚ
2 Likes
BFN
Big Fucking Needle 
3 Likes
5 posts were merged into an existing topic: The antiâ:no_entry_sign:-derailmentâ:railway_car: & threadâ:thread: hijackingâ:gun: threadâ:thread: 
Itâs been a little over a month since installing my xG3v2. It healed nicely but the depth is quite shallow (although the location on my knifes edge was perfect) which has its pros and cons:
Pros:
- Better lifting strength
- Better sensing (although this is my first magnet implant so I have nothing to compare to)
- Easy to see where it is (easier to âprobeâ around for sensing)
Cons:
- Easier to catch on surfaces (hasnât been a problem yet)
- Slightly uncomfortable when I rest my hand on it (although that seems to be lessening)
- Visually unappealing
I was stressed about the depth at first but it actually hasnât caused any problems. I put on/remove tight gloves and reach into my tight jeans pockets many times a day on/with that hand and it hasnât caused any problems at all. It even seems like the skin around it is âsmoothingâ out around it to make it less pronounced.
2 Likes
I think the âvisually unappealingâ bit might be because itâs different than what youâre used to. I canât see it at all in those first two pictures.
2 Likes
9 minute video of me psyching myself up to do my first self install which took like 20 seconds.
Spark and magnet install with a little help.
Donât use these videos as references on how to do things rightâŚ
4 Likes
Iâm always impressed with people who do their own installs. I do not have the emotional fortitude for that!
1 Like
Awesome videos @turbo2ltr
I think one of the best things about them, were the âmistakesâ , We all get to learn from those, be it our own or others.
So thanks for sharing 
How long ago were those installs done?
Next time you should you should put a step by step guide on one of your many monitors
OR
One step on EACH monitor 
One step on EACH monitor
Hahah!
The first xNT one was in 2018 2017 I think. Late Early 2018 I got an xEM install by @amal himself (and the only one in my right hand) and then the other 2 were mid 2019. I tried doing a self install on my right hand and just wasnât going to happen. I donât have the dexterity in my left hand to do it. There was actually a third that was supposed to happen in the 2019 session that my helper was going to install (he had done a self install) and I just wasnât feeling it and aborted.
I have a NeXT, xLED an xm1+ and a flexEM sitting here waiting for install⌠Iâve been lazy and havenât looked for a local installer.
1 Like
Bit of a cross post but a nice xseries install. Itâs pretty clear so hope someone finds it useful.
I was installing a blue xsiid into my motherâs hand L0.
Funny as sheâs a bit of a wimp but will sit through 8hr tattoo session chip was scanned after install and she even say the blue LED so was over the moon.
4 Likes